Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/scruss/micropython-syn6988

MicroPython library for the VoiceTX SYN6988 text to speech module
https://github.com/scruss/micropython-syn6988

micropython speech-synthesis syn6988 tts

Last synced: 20 days ago
JSON representation

MicroPython library for the VoiceTX SYN6988 text to speech module

Awesome Lists containing this project

README 

        
# micropython-SYN6988

MicroPython library for the YuTone VoiceTX SYN6988 text to speech module.



## Demo



https://github.com/scruss/micropython-SYN6988/assets/425706/bf107dc3-3db7-4eb7-90a4-6cfe5986529f



or demo audio download: syn6988-micropython-demo.mp3



which "reads" the following text:

```

[g2]Hello! [g1]你好![g2]

I can speak in English, and also in Chinese:

[g1]千里之行，始于足下。[g2]

which means: a journey of five hundred kilometres starts with the first step

[s1]I can speak slowly, [s9] and I can speak very fast[s5]

[v5]I can be [v10]loud or [v1]very quiet. [v5]

I can use [t1]low tones [t5]or [t8]high tones[t5]

[d][g0]my work here is done [x1]soundy[d]

```



## Introduction 



blue circuit board with central processor chip and audio outputs



The SYN6988 is one of several speech synthesizer / text-to-speech

(TTS) modules available inexpensively on AliExpress and other

vendors. It's impressive because:



* it produces clear English speech without resorting to phonemes;



* it has a line out / headphone jack and small speaker outputs, both

  featuring very clean audio;

  

* it is easy to interface to, either through asynchronous serial or

  SPI (the latter not attempted here);

  

* it has some flexibility in volume, pitch and rate of speech (but

  it's no [DECtalk](https://github.com/dectalk/dectalk));

  

* it has a large library of alert tones built-in;

  

* it is not expensive, being around 🇨🇦 $15.



Of course, there are downsides:



* all of the documentation *so far* is in Chinese;



* it has only one faintly-accented female voice with a slightly robotic

  delivery;

  

* you may not get the board you ordered! I was sold this board as

  having an XFS5152 chip when it clearly has a SYN6988.



### Where to buy



It's hard to recommend a vendor, as I can't guarantee they are selling a board with a SYN6988 on it. Check that the vendor description says SYN6988 (there are similar chips SYN6288 and SYN6658 with different capabilities) and the board has a chip with a clear **SYN6988** silkscreen. I've seen a few boards for sale that say SYN6658 on the PCB silkscreen, but have a SYN6988 in the image and description.

  

## Interfacing



The SYN6988 is a 3.3 V device for both logic and power. It requires a

two-wire UART connection plus an additional digital input pin to

monitor the busy status of the TTS.



        SYN6988        MicroPython Board     Raspberry Pi Pico

	   =========      ===================   ===================

	   

	        RDY            Digital Input         GPIO 2

		RXD            UART TXD              GPIO 0 (UART 0 TX)

		TXD            UART RXD              GPIO 1 (UART 0 RX)

		GND            Ground                Any GND pin

		3V3            3V3 supply            3V3(OUT)

		

The SYN6988 uses a fixed serial port rate defined by the arrangement

of resistors in the serial speed selection block. Mine is hard-wired

for 9600 baud.



For a Raspberry Pi Pico, these connections might be supported in code

with:



```python3

ser = machine.UART(0, baudrate=9600, bits=8, parity=None, stop=1)

busyPin = machine.Pin(2, machine.Pin.IN, machine.Pin.PULL_UP)



```



Audio output is either through the headphone / line out jack or via

the speaker pins. This output is unamplified. I can drive a very small

oval speaker at a comfortable volume from the speaker pins, but large

heaphones can be very quiet.



The board I have is not remotely breadboard-friendly. I solved that by

taking two 6-pin Arduino stacking headers, bending the pins out and

back in at right angles, then gluing the two headers back to

back. This gives a header block that bridges the central trough in a

breadboard, allowing the SYN6988 board to sit centrally.



SYNC6988 with Raspberry Pi Pico and small speaker



## Operation



If the board is connected correctly, the red Ready LED will be lit

when the TTS is not speaking. This LED will go out when the TTS is

speaking, and the RDY pin will go low shortly (about 0.1 to 0.7 s) after the

speech starts, and go high when speech is finished.



If the initialization code above is used, the following MicroPython

will speak a rather quiet "Hello" from the board:



```python3

import syn6988



s = syn6988.SYN6988(ser, busyPin)

s.speak("[v1]hello")

```



There are very few methods and properties to this module:



* **speak**(*string*) - sends *string* to the TTS. Output can be

  shaped with embedded text commands. Accepts Unicode text including

  Traditional Chinese characters. Makes an extremely poor job of

  attempting non-English or non-Chinese language.

  

* **block** = *True* | *False* - by default, speech is emitted in

  *blocking mode*: that is, the `speak()` method will not return until

  the TTS has indicated it is finished. If `block = False` is set,

  `speak()` will return immediately, but the TTS will still be speaking

  and waiting is left up to the programmer.



* **isBusy**() - if called in non-blocking mode, `isBusy()` returns

  true while the TTS is speaking. This can be used to prevent

  interrupting speech. If called in blocking mode, will always return

  false.



## Embedded text commands



The SYN6988 is controlled by commands surrounded by `[]`. There are

many of these, and I don't understand them all. I've put a few of them

in `test-syn6988.py` with I hope clear meanings of what they do. In

brief:



* `[d]` - reset the TTS to standard mode. Can be useful after calling

  any of the alert sounds.

  

* `[g0]` - automatic language guessing; `[g1]` - Chinese language

  preference; `[g2]` - English language preference. English spoken in

  Chinese mode has strange intonation, while Chinese spoken in English

  mode may not be correctly detected.

  

* `[p*]` - pause, for example `[p500]` pauses for 500 ms.



* `[s*]` - speech rate: `[s0]` slowest to `[s10]` fastest.



* `[t*]` - tone/pitch: `[t0]` lowest to `[t10]` highest.



* `[x0]` / `[x1]` - interpret a string starting with "sound" as one

  of several hundred (?) different tones, chimes and alarms. For

  example `[x1]soundy[d]` plays a rather pleasing chime which I

  overuse greatly. It's important to use `[d]` after this command or

  unexpected results will occur. A sound table reference is here: [SYN-6988 Speech with MicroPython – We Saw a Chicken …](https://scruss.com/blog/2023/06/28/syn-6988-speech-with-micropython/)

  

* `[v*]` - volume: `[v0]` silent, `[v1]` quietest to `[v10]` loudest.



## Internals



The SYN6988 accepts a wide range of input encodings, none of which are

supported by MicroPython. It does, however, support UTF16-BE (two

bytes per char, no BOM, high byte first; eg: "hello" =>

`b'\x00h\x00e\x00l\x00l\x00o'`) which can be fairly easily fudged to

work. If our UTF-16BE encoded data is in `data_bytes` and we define



```python3

tx_len = len(data_bytes) + 2

```



the SYN6988 will accept the following byte stream over the serial port

and attempt to speak it:



    0xFD, tx_len // 256, tx_len % 256, 0x01, 0x04, data_bytes



The data string shouldn't be too long: something under 4096

characters, perhaps. The board can take up to 700 ms to process text,

and hence we pause for that long to make sure text is all spoken.



## Author



Stewart Russell - [scruss.com](https://scruss.com/blog/) - aka [@[email protected]](https://xoxo.zone/@scruss)



## Licence



MIT. If you improve on this, though, please let me know so I can make this better.



## To do



* The UTF-8 -> UTF-16BE code works but feels like it could be improved. It has to stay something I can understand, though.



* There's a small chance that really long text will be skipped because I'm not waiting long enough for it to be processed when reading in blocking mode.



* Generalize this code (if possible) to work with SYN6288, SYN6658 and XFS5152 chipsets. I have several of these on order.



## References



* YuTone VoiceTX SYN6988 documentation (in Chinese only): [语音合成芯

  片-SYN6988中英文TTS语音芯

  片](http://www.voicetx.com/product/detail.html?id=11).



* My early attempts to drive this board from CPython: [Speech from

  Python with the SYN6988 module – We Saw a Chicken

  …](https://scruss.com/blog/2023/06/21/speech-from-python-with-the-syn6988-module/). This

  produces sound, but I'm actually driving it wrongly. Still works,

  though. Has an auto-translated copy of the programming reference,

  which is all I have had to work from.



* Richard Brautigan's poem *All Watched Over by Machines of Loving

  Grace*, "read" by a SYN6988 TTS chip driven by MicroPython: [All

  Watched Over By Machines of Loving Grace |

  SoundCloud](https://soundcloud.com/user8899915/all-watched-over-by-machines-of-loving-grace).