https://github.com/sedrubal/odroidcase
A acrylic case for the Odroid XU
https://github.com/sedrubal/odroidcase
blueprint case lasercut makers
Last synced: 5 months ago
JSON representation
A acrylic case for the Odroid XU
- Host: GitHub
- URL: https://github.com/sedrubal/odroidcase
- Owner: sedrubal
- Created: 2014-03-21T02:22:38.000Z (almost 12 years ago)
- Default Branch: master
- Last Pushed: 2014-09-15T22:56:38.000Z (over 11 years ago)
- Last Synced: 2025-07-01T04:06:01.769Z (7 months ago)
- Topics: blueprint, case, lasercut, makers
- Homepage:
- Size: 5.9 MB
- Stars: 1
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
OdroidCase
==========
A acrylic case for the [Odroid XU] (http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620)
This project contains two drawings (in different file types) for one box. You can use two different colours like me or you can be creative and change these models.
Preview
-------
[BOM](BOM.md)
-------------
Bill of materials.
Build Instructions
------------------
- lasercut the [part A](odroidCaseA.svg) and [part B](odroidCaseB.svg) on two plates (e.g. with [VisiCut](https://github.com/t-oster/VisiCut), then you can use the [VisiCut laser settings](https://github.com/fau-fablab/visicut-settings):
red: cut
(green: mark)
- if you use countersunk screws, then drill countersinks
- screw the four bottom screws into the large spacers and put them through the 3 lower plates
- screw the small spacers on the ground plate and screw the Odroid on top of them
- continue plugging the other plates onto the spacers
- put the top plate on the others and screw the last four screws into the spa spacers through the top
- stick the case-feet on the marked circles on the bottom
License
-------
OdroidCase
by
sedrubal
is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.