Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/sethitow/mbed-pinetime
Pinetime Firmware based on Arm MbedOS.
https://github.com/sethitow/mbed-pinetime
mbed pine64 pinetime
Last synced: 3 months ago
JSON representation
Pinetime Firmware based on Arm MbedOS.
- Host: GitHub
- URL: https://github.com/sethitow/mbed-pinetime
- Owner: sethitow
- Created: 2019-11-23T06:04:05.000Z (almost 5 years ago)
- Default Branch: master
- Last Pushed: 2021-03-25T23:23:43.000Z (over 3 years ago)
- Last Synced: 2024-04-20T21:32:09.715Z (7 months ago)
- Topics: mbed, pine64, pinetime
- Language: C
- Homepage:
- Size: 3.69 MB
- Stars: 15
- Watchers: 4
- Forks: 2
- Open Issues: 5
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Getting Started
> These instructions are macOS centric right now, but the Mbed toolchain will work on Mac, Windows, and Linux. Improvments to these instructions are welcome.
Install the arm-eabi-none toolchain
```
brew tap PX4/homebrew-px4
brew install PX4/homebrew-px4/gcc-arm-none-eabi-63
```
Optionally, install `nrfjprog`
```
brew cask install nordic-nrf-command-line-tools
```
Checkout all submodules `git submodule update --init --recursive`.
Install all the Python packages required for Mbed. Your options are:
- Install from the Pipfile. `pipenv install`
- Install from Mbed requirements.txt `pip install -r modules/mbed-os/requirements.txt`
To use the Makefiles, you must set the environment variable `MBED_PINETIME_PATH` to the root of the repository. If anyone has ideas on how to not need this or otherwise improve the build system, let me know.
# Development Notes
- [x] BMA421 Accelerometer
- [-] HRS3300 Heart Rate Sensor
- [x] Hynitron CST816S Touch Pad
- [-] Sitronix ST7789V LCD Driver
- [x] Macronix SPI Flash
- [x] Vibrator
- [x] LED backlight
- [x] ADC Battery Voltage Sense
- [ ] Physical button
### I2C
00> 0x15 Touchpad
- Only responds after a touch event.
- At 100khz, Limit of read from register 0x00 after a touch event is 190-195ish bytes. This is probably due to the chip going back to sleep.
00> 0x18 ACK Accelerometer
- BMA421 -- Not a public avalible chip, therefore no publicly availible drivers.
- Similar to BMA423
- Seems to require binary blob on startup (chip firmware?)
00> 0x44 ACK HALS3300 Heart Rate Sensor
- Datasheet is OK
- Resolution was set to 16bits 0x08
- Gain was set to 1 0x02
### SPI
Flash:
- SPI flash is now working with Mbed SPIF driver
- Needed to be "reset" by letting the battery die
- 4194304 bytes
Display:
- Display needs mode 3 SPI?
- https://www.allaboutcircuits.com/technical-articles/spi-serial-peripheral-interface/
- Got it sort-of working with Mbed ports of the Adafruit GFX libraries.
- Still work to be done here
I can't get the physical button to work for the life of me. Someone please help 😂