https://github.com/smittytone/impclock
A very simple four-digit timepiece developed using the Electric Imp Platform
https://github.com/smittytone/impclock
Last synced: 9 months ago
JSON representation
A very simple four-digit timepiece developed using the Electric Imp Platform
- Host: GitHub
- URL: https://github.com/smittytone/impclock
- Owner: smittytone
- License: mit
- Created: 2017-03-17T19:59:14.000Z (almost 9 years ago)
- Default Branch: master
- Last Pushed: 2020-09-25T19:29:08.000Z (over 5 years ago)
- Last Synced: 2025-02-12T11:23:30.713Z (11 months ago)
- Language: Squirrel
- Homepage:
- Size: 762 KB
- Stars: 0
- Watchers: 4
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# cløck 2.2.0 #
A very simple four-digit timepiece developed using the [Electric Imp Platform](https://electricimp.com). It makes use of the [Adafruit 0.56-inch 4-digit, 7-segment LED display](http://www.adafruit.com/products/878), which is based on the Holtek HT16K33 controller.
## Hardware ##
### Ingredients ###
- 1x [Electric Imp Developer Kit](https://developer.electricimp.com/gettingstarted/devkits)
- 1x [Adafruit 1.2in 8x8 LED Matrix + I²C Backpack](https://www.adafruit.com/products/1856)
- 4x short female-to-female connector wires
### Assembly ###
1. Assemble the Adafruit display and backpack
1. Solder connector pins to the Electric Imp April breakout board.
1. Slot the imp001 card into the breakout board
1. Use the connector wires as per the table below
| April Pin | LED Pin |
| --- | --- |
| GND | - |
| 3V3 | + |
| Pin1 | SCL |
| Pin2 | SDA |
## Software ##
### Setup ###
1. Visit [Electric Imp impCentral](https://impcentral.electricimp.com/login/) to sign up for a free developer account. You will be asked to confirm your email address.
2. Visit Electric Imp’s [Getting Started Guide](https://developer.electricimp.com/gettingstarted/blinkup) to learn how to configure your imp001 to access your local WiFi network, and how to enter code into the IDE and run it on your device.
## User Interface ##
Visit your cløck’s agent URL for a control interface.
## Release Notes ##
- 2.2.0 *21 May 2020*
- Signal alarms using SMS via Twilio.
- Update JQuery to 3.5.x.
- Update Bootstrap to 4.5.x.
- 2.1.3 *18 December 2019*
- Support Rocky 3.0.0.
- 2.1.2 *5 September 2019*
- Support polite deployments
- Update Jquery to 3.4.1, Boostrap to 4.3.1, Simpleslack to 1.0.1, Bootmessage to 2.2.2
- 2.1.1 *18 April 2019*
- Update JQuery to 3.4.0
- 2.1.0 *6 March 2019*
- Sync agent and device code with [MatrixClock](https://github.com/smittytone/MatrixClock)
- Add night mode
- Revise alarms code
- Add API debugging
- Remove redundant agent-side server.save() result checks
- Update dependencies (Bootstrap 4.3.0; Rocky 2.0.2; HT16K33Segment 2.0.0)
- 2.0.0 *1 November 2018*
- Update to [Bootstrap 4.1.3](https://getbootstrap.com/)
- Completely redesign agent API
- Add alarms
- Controller support
- Fix CSS bugs
- Display a leading zero in 24-hour mode (times below 10am)
- 1.4.0 *13 June 2018*
- Update to [Bootstrap 4.1.1](https://getbootstrap.com/)
- Update Web UI based on Bootstrap
- Separate out Web UI into own file for clarity
- Add [DisconnectionManager](https://github.com/smittytone/generic/blob/master/disconnect.nut) support
- Upgrade [Rocky](https://developer.electricimp.com/libraries/utilities/rocky) to 2.0.1
- Update to [JQuery 3.3.1](https://jquery.com)
- Prevent Ajax XHR caching
- 1.3.0
- Minor changes and bug fixes.
## Licence ##
The cløck design and software is copyright © 2014-20 by Tony Smith. It is made available under the [MIT Licence](./LICENSE).