https://github.com/smkent/prusa-slicer-config
My configuration profiles for PrusaSlicer
https://github.com/smkent/prusa-slicer-config
Last synced: about 2 months ago
JSON representation
My configuration profiles for PrusaSlicer
- Host: GitHub
- URL: https://github.com/smkent/prusa-slicer-config
- Owner: smkent
- License: cc0-1.0
- Created: 2023-11-25T23:09:46.000Z (over 1 year ago)
- Default Branch: main
- Last Pushed: 2024-05-05T07:19:02.000Z (about 1 year ago)
- Last Synced: 2025-01-28T14:15:11.559Z (4 months ago)
- Size: 194 KB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
These are my [PrusaSlicer][prusaslicer] profiles and settings for the
[Sovol SV06 Plus][sovol-sv06-plus].
# Usage
This repository is meant to be cloned into PrusaSlicer's configuration folder.
This folder's location varies by operating system:
* Linux: **~/.config/PrusaSlicer**
* Mac: **~/Library/Application Support/PrusaSlicer**
* Windows: **C:/Users/(username)/AppData/Roaming/PrusaSlicer**
You can also check the location of this folder using PrusaSlicer's **Help** -> **Show
Configuration Folder** option:
# Sovol SV06 Plus profile
PrusaSlicer includes a built-in Sovol SV06 Plus printer profile.
My Sovol SV06 Plus printer profile is based on the built-in profile with the
following changes:
* Modified retraction settings (**Printer Settings** -> **Extruder 1** ->
**Retraction**)
* Minimum travel after retraction: **2** (default 0.5)
* **Wipe while retracting**: Disabled (default: enabled)
* Use "Marlin 2" G-code flavor instead of "Marlin (legacy)"
* Custom start and end G-code (See below)
* A different [bed mesh](printer/beds/sovol-sv06-plus-model.stl)
and [texture](printer/beds/sovol-sv06-plus-texture-white-logo.png)
## Retraction settings screenshot
## Marlin 2 G-code flavor
PrusaSlicer's base SV06 Plus printer profile defaults to "Marlin (legacy),"
whereas the SV06 Plus ships with Marlin 2.0.9.2.
The only difference in sliced files I can see is Marlin 2 uses the
[`P` argument to `M204` instead of `S`][marlin-m204]
(e.g. `M204 P1000` vs. `M204 S1000`).
## G-code customizations
Start G-code:
* Heat the bed to 5°C below the target bed temperature before heating the
nozzle.
* Draw the purge line just outside the print area along the X-axis (the built-in
profile draws the purge line within the print area along the Y-axis), like the
Prusa MK3S+ built-in profile. I randomized the purge line position
along the X-axis to prevent wear on a single spot.
End G-code:
* Raise the Z-axis higher than the default profile does, along with a small
filament retraction.
* Stop heating the nozzle and bed before turning off the fan.
# Attribution and License
The [Sovol SV06 Plus bed model](printer/beds/sovol-sv06-plus-model.stl) was exported from
[Sovol's complete assembly model for the SV06 Plus][sovol-sv06-plus-complete-assembly-model].
The [Sovol SV06 Plus bed texture image](printer/beds/sovol-sv06-plus-texture-white-logo.png)
is from
[Catfisher4's SV06 Plus Build Plate Package][catfisher4-sv06-plus-build-plate-package],
licensed under
[Creative Commons (4.0 Interational License) Attribution][cc-by-4.0].
The remaining contents of this repository are licensed under
[Creative Commons CC0 1.0 Universal (Public Domain)][license].
[catfisher4-sv06-plus-build-plate-package]: https://www.printables.com/model/534551-sovol-sv06-plus-build-plate-package-texture-and-mo
[cc-by-4.0]: http://creativecommons.org/licenses/by/4.0/
[license]: http://creativecommons.org/publicdomain/zero/1.0/
[marlin-m204]: https://marlinfw.org/docs/gcode/M204.html
[prusaslicer]: https://www.prusa3d.com/page/prusaslicer_424/
[sovol-sv06-plus-complete-assembly-model]: https://github.com/Sovol3d/SV06-PLUS/blob/master/SV06%20PLUS%203D/STEP/SV06%20Plus%20Complete%20Assembly%20300x300x340.rar
[sovol-sv06-plus]: https://www.sovol3d.com/products/sovol-sv06-plus-fully-open-source-3d-printer-with-linear-rail-structure