https://github.com/snowdogapps/magemirror-raspberrypi-config
https://github.com/snowdogapps/magemirror-raspberrypi-config
Last synced: 15 days ago
JSON representation
- Host: GitHub
- URL: https://github.com/snowdogapps/magemirror-raspberrypi-config
- Owner: SnowdogApps
- Created: 2016-09-22T08:17:17.000Z (over 8 years ago)
- Default Branch: master
- Last Pushed: 2016-09-22T08:30:17.000Z (over 8 years ago)
- Last Synced: 2025-04-12T21:58:32.410Z (15 days ago)
- Size: 0 Bytes
- Stars: 0
- Watchers: 4
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# magemirror-raspberrypi-config
This document describes how to configure touch frame on Raspbian (RaspberryPI) to work in portrait mode.
## Rotate display and turn of overscan
`sudo nano /boot/config.txt`
uncomment:
`disable_overscan=1`
add to the end of file:
`display_rotate=1`
## Rotate touch frame input
install xinput:
`sudo apt-get install xinput`
find your frame device:
`xinput --list`
swap and invert axes (for portrait mode):
`xinput set-prop 6 'Evdev Axes Swap' 1`
`xinput set-prop 7 'Evdev Axes Swap' 1`
`xinput set-prop 6 'Evdev Axis Inversion' 1 0`
`xinput set-prop 7 'Evdev Axis Inversion' 1 0`
If touch frame works upside-down then switch `1 0` to `0 1`
## Rotate touch frame input on system boot
Create the script:
`sudo nano /etc/xdg/lxsession/LXDE-pi/screenflip.sh`
Write down commands into script:
`xinput set-prop 6 'Evdev Axes Swap' 1`
`xinput set-prop 7 'Evdev Axes Swap' 1`
`xinput set-prop 6 'Evdev Axis Inversion' 1 0`
`xinput set-prop 7 'Evdev Axis Inversion' 1 0`
Setup access:
`sudo chmod 755 /etc/xdg/lxsession/LXDE-pi/screenflip.sh`
Add line:
`@/etc/xdg/lxsession/LXDE-pi/screenflip.sh`
in files:
`sudo nano /etc/xdg/lxsession/LXDE-pi/autostart`
`sudo nano /home/pi/.config/lxsession/LXDE-pi/autostart`