https://github.com/souradeepdutta/face-detection-door-lock-system

This repository provides a project for creating a face detection-based door lock system using an ESP32 CAM, relay module, and solenoid lock. It allows face enrollment and automatic door unlocking when a recognized face is detected. The project includes setup instructions, hardware connections, and code for implementation.
https://github.com/souradeepdutta/face-detection-door-lock-system

aurdino doorlocksystem esp32-cam face-detection face-detection-doorlock-system hardware-project raspberry-pi

Last synced: 2 months ago
JSON representation

This repository provides a project for creating a face detection-based door lock system using an ESP32 CAM, relay module, and solenoid lock. It allows face enrollment and automatic door unlocking when a recognized face is detected. The project includes setup instructions, hardware connections, and code for implementation.

• Host: GitHub
• URL: https://github.com/souradeepdutta/face-detection-door-lock-system
• Owner: souradeepdutta
• License: mit
• Created: 2024-08-03T10:24:55.000Z (almost 2 years ago)
• Default Branch: main
• Last Pushed: 2024-11-22T15:41:29.000Z (over 1 year ago)
• Last Synced: 2025-05-14T20:44:29.720Z (about 1 year ago)
• Topics: aurdino, doorlocksystem, esp32-cam, face-detection, face-detection-doorlock-system, hardware-project, raspberry-pi
• Language: C
• Homepage:
• Size: 23.1 MB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

          
# ESP32 CAM Face Detection Door Lock System

## Overview

This project utilizes an ESP32 CAM board along with a relay module and solenoid lock to create a door lock system that automatically unlocks upon recognizing enrolled faces.

## Requirements

For this project, you will need the following components:

- ESP32 CAM board

- UART TTL programmer

- Relay module

- Solenoid lock

- LEDs

- 12V power supply or battery

- 7805 regulator (to provide 5V)

- 100uF 16V capacitor

- Breadboard and wires

## Installation

1. **Setup ESP32 CAM**:

   - Connect the ESP32 CAM to your computer using a UART TTL programmer.

   - Ensure the ESP32 CAM is powered with either a 5V power source or through the 7805 regulator if using a higher voltage supply.

   - Download the modified camera web server example code.

   - Upload the code to the ESP32 CAM using the Arduino IDE or similar software.

2. **Configure WiFi**:

   - Edit the code to include your WiFi SSID and password.

   - Upload the edited code to the ESP32 CAM.

3. **Hardware Connections**:

   - Connect the relay module and solenoid lock to the ESP32 CAM according to the provided wiring diagram.

   - Ensure proper power supply connections using the 7805 regulator if required.

4. **Testing**:

   - Power on the circuit and wait for the ESP32 CAM to start.

   - Access the IP address displayed on the serial monitor through a web browser.

   - Enroll faces by following the on-screen instructions.

   - Test the system by presenting enrolled faces to the camera and verifying if the door unlocks.

## Usage

1. **Enroll Faces**:

   - Navigate to the web interface and click on "Enroll Face".

   - Follow the prompts to capture images of your face for enrollment.

2. **Unlocking**:

   - When a recognized face is detected, the relay module triggers the solenoid lock to open.

## Contributing

Contributions to improve or extend this project are welcome. Fork the repository, make your changes, and submit a pull request.