https://github.com/sparkfun/OpenLog

Open Source Hardware Datalogger
https://github.com/sparkfun/OpenLog

data-logging sparkfun-products

Last synced: about 1 month ago
JSON representation

Open Source Hardware Datalogger

• Host: GitHub
• URL: https://github.com/sparkfun/OpenLog
• Owner: sparkfun
• License: other
• Created: 2009-12-23T20:29:49.000Z (almost 15 years ago)
• Default Branch: master
• Last Pushed: 2022-06-09T14:54:06.000Z (over 2 years ago)
• Last Synced: 2024-04-15T00:11:16.923Z (8 months ago)
• Topics: data-logging, sparkfun-products
• Language: C++
• Homepage: https://www.sparkfun.com/products/9530
• Size: 2.88 MB
• Stars: 532
• Watchers: 98
• Forks: 213
• Open Issues: 21
• Metadata Files:
  • Readme: README.md
  • Changelog: CHANGELOG.md
  • License: LICENSE.md

Awesome Lists containing this project

• awesome-flying-fpv - OpenLog - With [blackbox](https://github.com/thenickdude/blackbox/) firmware for blackbox data recorder (today usually part of main FC). (Telemetry & Logs 📊 / Modules 🧩)

README

        
SparkFun OpenLog

================

  

   

   

  

  

    SparkFun OpenLog (DEV-13712)

    SparkFun OpenLog with Headers (DEV-13955)

  

OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. 

Repository Contents

-------------------

* **/Documentation** - Data sheets, additional product information

* **/Firmware** - Example sketches for the OpenLog, and for an Arduino connected to the OpenLog.

* **/Hardware** - Hardware design files for the OpenLog PCB. These files were designed in Eagle CAD.

* **/Libraries** - Libraries for use with the OpenLog.

* **/Production** - Production panel files (.brd)

Documentation

--------------

* **[Hookup Guide](https://learn.sparkfun.com/tutorials/openlog-hookup-guide)** - Basic hookup guide for the OpenLog.

* **[SparkFun Fritzing repo](https://github.com/sparkfun/Fritzing_Parts)** - Fritzing diagrams for SparkFun products.

* **[SparkFun 3D Model repo](https://github.com/sparkfun/3D_Models)** - 3D models of SparkFun products. 

* **[SparkFun Graphical Datasheets](https://github.com/sparkfun/Graphical_Datasheets)** -Graphical Datasheets for various SparkFun products.

License Information

-------------------

This product is _**open source**_! 

Please review the LICENSE.md file for license information. 

If you have any questions or concerns on licensing, please contact [email protected].

Distributed as-is; no warranty is given.

- Your friends at SparkFun.

_SDFatLib-beta and SerialPort are written by Bill Greiman, and released under GPLv3._

Version History

---------------

For a full view of changes please see the [changelog](https://github.com/sparkfun/OpenLog/blob/master/CHANGELOG.md). 

OpenLog v4 is refactored with better RAM utilization for better performance at higher record speeds (115200/57600).

OpenLog v3 is stable, supports FAT32 cards up to 64GB and supports higher record speeds (115200/57600).

OpenLog v2 is a bit buggy but supports FAT32 and SD cards up to 16GB.  

OpenLog v1 is stable but only supports FAT16 and up to 2GB.  

* **v1.0**  Buggy initial release

* **v1.1**  Small changes to system settings and EEPROM storage.

* **v1.2**  Added wild card to listing and remove commands. Added read file command.

* **v1.3**  Added auto buffer record if unit sits idle for more than 5 seconds.

* **v1.4**  Increase buffer size to 900 bytes. Pinning down URU errors.

* **v1.5**  Lowered power consumption to ~2mA avg. Added 4800 and 19200 baud rates.

* **v1.51** Added configurable escape character, and escape character amount.

* **v1.6**  Added ability to configure via config.txt file.

* **v2.0**  Massive overhaul. Ported to sdfatlib. Now supports FAT16/FAT32/SD/SDHC.

* **v2.1**  Power save not working. Fixed issue 35. Dropping characters at 57600bps.

* **v2.11** Tested with 16GB microSD. Fixed issues 30 & 34. Re-enable power save.

* **v2.2**  Modified append_file() to use a single buffer. Increased HardwareSerial.cpp buffer to 512 bytes.

* **v2.21** ringp fork brought in. rm dir, cd .., and wildcards now work!

* **v2.3**  Migrated to v10.10.10 of sdfatlib. Moved to inline RX interrupt and buffer.

* **v2.4**  Merged ringp updates. Commands cd, rm, ls work again!

* **v2.41** Power loss bug fixed. Adding support for 38400bps for testing with SparkFum 9DOF IMU logging. 

* **v2.5**  Added software reset command. Modified the read command to print extended ASCII characters.

* **v2.51** Changed command prompt control to ignore \n for easier control from microcontroller.

* **v3.0**  Migration to Arduino v1.0 and better recording speed at 115200bps and 57600bps.

* **v3.1**  Better handling of recording during power loss.

* **v3.2**  Freed up RAM for larger RX ring buffer. Added support for wildcards and ability to ignore emergency override.

* **v3.3**  Added ability to ignore escape character checking and corrected incremental log naming.

* **v4.0**  Re-worked to be compatible with Arduino v1.6.x. Freed RAM to increase RX buffer size.