https://github.com/sparkfun/monster_moto_shield
Monster Moto Shield available from SparkFun Electronics.
https://github.com/sparkfun/monster_moto_shield
Last synced: 2 months ago
JSON representation
Monster Moto Shield available from SparkFun Electronics.
- Host: GitHub
- URL: https://github.com/sparkfun/monster_moto_shield
- Owner: sparkfun
- Created: 2014-05-06T16:29:17.000Z (about 11 years ago)
- Default Branch: master
- Last Pushed: 2020-07-24T20:56:13.000Z (almost 5 years ago)
- Last Synced: 2025-03-28T09:51:28.492Z (3 months ago)
- Language: C++
- Homepage:
- Size: 172 KB
- Stars: 30
- Watchers: 53
- Forks: 16
- Open Issues: 3
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
Monster Moto Shield
===================
[](https://www.sparkfun.com/products/10182)
This motor shield contains a pair of VNH2SP30 full-bridge motor drivers, pitched for the 5mm screw terminals.
Features
-------------------
* Voltage max: 16V
* Maximum current rating: 30 A
* Practical Continuous Current: 14 A
* Current sensing available to Arduino analog pin
* MOSFET on-resistance: 19 mΩ (per leg)
* Maximum PWM frequency: 20 kHz
* Thermal Shutdown
* Undervoltage and Overvoltage shutdown
Repository Contents
-------------------
* **/Firmware** - Example Arduino sketch
* **/Hardware** - All Eagle design files (.brd, .sch)
License Information
-------------------
The hardware is released under [Creative Commons ShareAlike 4.0 International](https://creativecommons.org/licenses/by-sa/4.0/).
The code is beerware; if you see the authors (or any SparkFun employee) at the local, and you've found our code helpful, please buy us a round!
Distributed as-is; no warranty is given.