https://github.com/sparkfun/sparkfun_thing_plus_esp32-s3
A SparkFun Thing Plus development board for the ESP32-S3.
https://github.com/sparkfun/sparkfun_thing_plus_esp32-s3
sparkfun-tutorial
Last synced: 9 months ago
JSON representation
A SparkFun Thing Plus development board for the ESP32-S3.
- Host: GitHub
- URL: https://github.com/sparkfun/sparkfun_thing_plus_esp32-s3
- Owner: sparkfun
- License: other
- Created: 2023-12-11T16:32:59.000Z (almost 2 years ago)
- Default Branch: main
- Last Pushed: 2024-03-28T21:22:27.000Z (over 1 year ago)
- Last Synced: 2024-04-15T00:11:27.630Z (over 1 year ago)
- Topics: sparkfun-tutorial
- Language: C++
- Homepage: https://docs.sparkfun.com/SparkFun_Thing_Plus_ESP32-S3/
- Size: 33.8 MB
- Stars: 0
- Watchers: 4
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE.md
Awesome Lists containing this project
README
SparkFun Thing Plus - ESP32-S3
========================================
[](https://www.sparkfun.com/products/24408)
*[SparkFun Thing Plus - ESP32-S3) (WRL-24408)](https://www.sparkfun.com/products/24408)*
The [SparkFun Thing Plus - ESP32-S3](https://www.sparkfun.com/products/24408) brings a powerful and versatile IoT development platform to the Thing Plus product line. It features the ESP32 WROOM-S3 MINI wireless module from espressif™. The ESP32 WROOM-S3 is built around an Xtensa® 32-bit LX7 processor with massive processing power that operates at up to 240 MHz. It supports both 2.4 GHz WiFi and Bluetooth® 5 (LE) with a built-in PCB antenna. This version of the ESP32-S3 has 4MB Flash memory and 2MB of dynamic/PSRAM and the board also has with a µSD card slot for those who need more storage space.
The module has a large set of peripherals including UART, I2C, SPI, LCD control, SDIO host, TWAI® controller (compatible
with ISO 11898-1, i.e., CAN Specification 2.), and more. The module allows for customizing which GPIO pins these peripherals operate on though some are limited to specific pins. The ESP32-S3 can run two USB ports simultaneously and can even act as a USB host host device.
The Thing Plus footprint breaks out all of the ESP32-C6's 23 GPIO pins to a pair 0.1"-spaced plated through hole (PTH) headers. The board also has a USB-C connector for primary power and programming, 2-pin JST connector for a LiPo battery (not included), a microSD card slot for expanded storage, and a Qwiic connector to integrate it into SparkFun's [Qwiic ecosystem](https://www.sparkfun.com/qwiic). It also includes a charging circuit and fuel gauge for charging and monitoring an attached LiPo battery.
Repository Contents
-------------------
* **[/Documents](/Documents/)** - Datasheets, additional product information
* **[/Hardware](/Hardware/)** - Eagle design files (.brd, .sch)
* **[/Firmware](/Firmware/)** - Example sketches demonstrating extra peripherals
* **[/docs](/docs)** - Documentation files for the Thing Plus ESP32-S3 Hookup Guide
Documentation
--------------
* **[Hookup Guide](https://sparkfun.github.io/SparkFun_Thing_Plus_ESP32-S3)** - Hookup guide for the Thing Plus ESP32-S3.
Product Versions
----------------
* [WRL-24408](https://www.sparkfun.com/products/24408) - v1.0, Initial Release
License Information
-------------------
This product is _**open source**_!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact technical support on our [SparkFun forums](https://forum.sparkfun.com/viewforum.php?f=152).
Distributed as-is; no warranty is given.
- Your friends at SparkFun.