https://github.com/sparkfun/sparkfun_thing_plus_esp32_c6

The SparkFun Thing Plus ESP32-C6 is a wireless development board built around the ESP32-C6 WROOM-1-N16.
https://github.com/sparkfun/sparkfun_thing_plus_esp32_c6

sparkfun-tutorial

Last synced: 4 months ago
JSON representation

The SparkFun Thing Plus ESP32-C6 is a wireless development board built around the ESP32-C6 WROOM-1-N16.

• Host: GitHub
• URL: https://github.com/sparkfun/sparkfun_thing_plus_esp32_c6
• Owner: sparkfun
• Created: 2023-06-19T19:39:31.000Z (about 2 years ago)
• Default Branch: main
• Last Pushed: 2024-07-09T20:40:27.000Z (12 months ago)
• Last Synced: 2024-07-10T01:05:58.351Z (12 months ago)
• Topics: sparkfun-tutorial
• Language: HTML
• Homepage: https://sparkfun.github.io/SparkFun_Thing_Plus_ESP32_C6
• Size: 32.6 MB
• Stars: 5
• Watchers: 8
• Forks: 1
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
SparkFun Thing Plus - ESP32-C6

==============================

[![SparkFun Thing Plus - ESP32-C6](https://cdn.sparkfun.com/r/600-600/assets/parts/2/3/0/8/5/DEV-22924-Thing-Plus-ESP32-C6-Feature.jpg)](https://www.sparkfun.com/products/22924)

[*SparkFun Thing Plus - ESP32-C6 (DEV-22924)*](https://www.sparkfun.com/products/22924)

The SparkFun Thing Plus ESP32-C6 is a powerful wireless development board built around the ESP32-C6 WROOM-1-N16 wireless module from espressif™. The ESP32-C6 is built around a single-core RISC-V processor with 16MB internal Flash memory. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.12.4) wireless protocols and has a built-in PCB antenna. The ESP32-C6 has 23 multifunctional GPIO (*most* peripherals available on any GPIO), up to 7 12-bit ADC channels, up to 2 UARTs, USB Serial, one Low-Power UART, two I2C buses (one standard, one low-power), and one I2S bus.

This Thing Plus has a pair of 0.1"-spaced plated through hole (PTH) pins breaking out all of the ESP32's GPIO pins as well as connections for Reset, Boot, regulator enable, and the voltage rails (3.3V, USB, Battery), a USB-C connector, 2-pin JST connector for attaching a single-cell LiPo battery, MCP73831 battery charger, MAX17048 battery fuel gauge, 4-pin Qwiic connector, and µSD card slot. The board has three LEDs for Power (Red), Battery Charge Indicator (Yellow), and STAT (RGB WS2812). The WS2812's data-in pin is tied to IO23 on the ESP32-C6.  

Repository Contents

-------------------

* **/Documents** - Datasheets, additional product information 

* **/Hardware** - Eagle design files (.brd, .sch)

* **/Production** - Production panel files (.brd)

* **/docs** - Documentation files for the Thing Plus ESP32-C6

Documentation

--------------

* **[Hookup Guide](https://docs.sparkfun.com/SparkFun_LTE_Stick_LARA_R6)** - Basic hookup guide for the SparkFun Thing Plus - ESP32-C6.

Product Versions

----------------

* [DEV-22924](https://www.sparkfun.com/products/22924) - Initial release

License Information

-------------------

This product is _**open source**_! 

Please review the LICENSE.md file for license information. 

If you have any questions or concerns on licensing, please contact technical support on our [SparkFun forums](https://forum.sparkfun.com/viewforum.php?f=152).

Distributed as-is; no warranty is given.

- Your friends at SparkFun.