Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/ssrselvamraju/mblogic-S2-client

The client side HMI for the S2 modbus control. This has many html and css pages which were custom edited and also have needed server and client base programs.
https://github.com/ssrselvamraju/mblogic-S2-client

Last synced: 21 days ago
JSON representation

The client side HMI for the S2 modbus control. This has many html and css pages which were custom edited and also have needed server and client base programs.

Awesome Lists containing this project

README

        

#################################################################
These are the notes for the work being done on the S2HMI
#################################################################

####S2GUI.svg#####

[x] The Digital and Analog inputs are to be included >>> Configure the Str buttons right >>>>>>>>>>Done

[x] Check if speed and angle buttons are configured correctly.>>>>>>>Done

[x] There was no id for the vertical display bar, check that.>>>>>>>>>Done

[x] Adjust graph dimensions!!!!!!!!! >>> Adjust timing and and sizes >>>>>>>>>>Done>>>To be changed after talking to Chun as per requirements later

[ ] Try configuring alarms and events

[X] Fix vertical column issue, if doesn't work, add two columns with different ranges >>>>>>>>>Done

[X] Reconfigure addresses after getting ones from Harsha. Save old file and do this in a new file.

[?] Cleanup unwanted items.

[X] Change graph width (x) to about 100 or 200, as it's very small now.

[X] Issues with communication, look into sourcecode.

[X] Check writing and reading a 32bit input/holding register.... Use the full program and in engg screen use the last address to be a 32 bit int.

[ ] Generalize the start of different py files like heartbeat and logdata to start with server parameters as set in the original client. > Get values from the client, or add everything on a sh file.

##############################################################
##Changes Made###
#############################################################

[ ] Check these and modify in this file.

#Modbusclient.py

>>def SetCoilsBool()

>>added SetCoils()

>>def SetHoldingRegistersInt()

#ModbusDatalib.py

>>def coilvalue()

##Other notes

>>>>>>Be sure to check the mbhmi.config file while working with different servers.

#Steps to follow for client start up

1. Start the hmiservermbc_custom.sh to start the client software.
2. On the browser go to http://localhost:8084/s2o??build.xhtml to open the client HMI on the browser (fill ?? with latest build number).
3. Go into the hmiserver directory and and run " python hmiMBheartbeatclient.py " in terminal to start the heartbeat.
4. In the same directory run " python logXYdata.py " in the terminal to start logging the truck's xy position to file.
5. In the terminal run " gnuplot gnuplot.gnu " to start graphing the data which is updated every 1/2 second.