https://github.com/stm32duino/x-nucleo-53l7a1
Arduino library to support the X-NUCLEO-53L7A1 based on VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV
https://github.com/stm32duino/x-nucleo-53l7a1
Last synced: about 2 months ago
JSON representation
Arduino library to support the X-NUCLEO-53L7A1 based on VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV
- Host: GitHub
- URL: https://github.com/stm32duino/x-nucleo-53l7a1
- Owner: stm32duino
- License: bsd-3-clause
- Created: 2023-01-27T14:03:01.000Z (about 2 years ago)
- Default Branch: main
- Last Pushed: 2023-03-06T09:01:26.000Z (about 2 years ago)
- Last Synced: 2024-12-31T12:51:01.726Z (4 months ago)
- Size: 11.7 KB
- Stars: 1
- Watchers: 3
- Forks: 2
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE.md
Awesome Lists containing this project
README
# X-NUCLEO-53L7A1
Arduino library to support the X-NUCLEO-53L7A1 based on VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with wide field view.
This sensor uses I2C to communicate. And I2C instance is required to access to the sensor.
The APIs provide simple distance measure and multizone detection in both polling and interrupt modes.
## Examples
There are 3 examples with the X-NUCLEO-53L7A1 library:
* X_NUCLEO_53L7A1_HelloWorld: This example code is to show how to get multizone detection and proximity values of the VL53L7CX sensor in polling mode.
* X_NUCLEO_53L7A1_ThresholdsDetection: This example code is to show how to configure the thresholds detection.
* X_NUCLEO_53L7A1__MultiSensorRanging: This example code is to show how to make three VL53L7CX ToF sensors run simultaneously.
## Dependencies
This package requires the following Arduino library:
* STM32duino VL53L7CX: https://github.com/stm32duino/VL53L7CX
## Documentation
You can find the source files at
https://github.com/stm32duino/X-NUCLEO-53L7A1
The VL53L7CX datasheet is available at
https://www.st.com/en/imaging-and-photonics-solutions/vl53l7cx.html