Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/suda/gpuminingrig
Files and instructions to build a 6 GPU Mining Rig
https://github.com/suda/gpuminingrig
3d-printing cryptocurrency ethereum mining stl-files
Last synced: 18 days ago
JSON representation
Files and instructions to build a 6 GPU Mining Rig
- Host: GitHub
- URL: https://github.com/suda/gpuminingrig
- Owner: suda
- Created: 2017-10-14T14:08:20.000Z (about 7 years ago)
- Default Branch: master
- Last Pushed: 2022-02-05T12:06:26.000Z (almost 3 years ago)
- Last Synced: 2023-03-11T05:35:42.013Z (over 1 year ago)
- Topics: 3d-printing, cryptocurrency, ethereum, mining, stl-files
- Size: 11.9 MB
- Stars: 66
- Watchers: 14
- Forks: 25
- Open Issues: 6
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# 6 GPU Mining Rig
Read this in other languages: English, Português-Brasil
## General info
* Dimensions: 540x340x340mm
* Support for two PSUs
* Stackable
* Build cost: ~€60
### 💰 Donations
If you successfully build one I would appreciate some kickback ☺️
* **BTC:** `1K7Uc9MDzokCGEsUxrQQXn59VQ1Q9AWGvZ`
* **BCH:** `1BHM8oACVN6F4xksXAAP3nR9EoAkfd8sGF`
* **ETH:** `0x8CcA7589d8061ad4D3D913412d1EAD71cbEae081`
* **LTC:** `LRJ4Evzmyynp8Uswiy7e2uWhPKBNiSHroq`
## Parts, materials and tools
### Metal
* 5x 2020 500mm profiles
* 8x 2020 300mm profiles
* 2x 2020 150mm profiles
* 16x M3 8mm screws
* 40x M4 8mm screws
* 8x PC case 4mm screws
* 40x M4 nuts
* 28x M6 16mm screws (Make sure to get flat, countersunk screwheads)
* Zip ties
### 3D Printed
* 6x [GPU Bracket Rail](parts/GPUBracketRail.stl)
* 6x [Raiser Rail](parts/RaiserRail.stl)
* [PSU Frame Left](parts/PSUFrameLeft.stl)
* [PSU Frame Right](parts/PSUFrameRight.stl)
* [62mm Mobo Bracket Rail](parts/MoboBracketRail62mm.stl)
* 2x [40mm Mobo Bracket Rail](parts/MoboBracketRail40mm.stl)
* 3x [33mm Mobo Bracket Rail](parts/MoboBracketRail33mm.stl)
* 4x [Right Angle Bracket](parts_others/90_bracket.stl)
* 10x [2020 Corner Connector](parts_others/2020_connect_v2.stl)
* 40x [T Slot nut](parts_others/t_slot_nut_m4.stl)
## Optional
* 4x [Feet_v1](parts/Feet_v1.stl)
* 4x [Rail-Snapper-Insert__MotherBoardv1](parts/Rail-Snapper-Insert__MotherBoardv1.stl)
* These can be used to snap the motherboard brackets into place, so you won't need the screws.
### Tools
* Drill
* M6 screw tap
* 3D Printer
## Assembly
**Note:** Any dimensions are measured on the inner parts of the frame.
#### 1. Thread all the profiles
#### 2. Put M4 nuts into all printed T Slot nuts
#### 3. Place the T Slot nuts in the following profiles:
* 2x 6 nuts in 500mm
* 7 nuts in 500mm
* 3 nuts in 400mm
* 4x 2 nuts in 300mm
#### 4. Screw the frame together using the M6 screws, 300mm+500mm profiles and the 2020 Corner Connectors
#### 5. Screw the PSU frames to both power supplies
#### 6. Screw the PSU support Right Angle Brackets
**Note:** ~116mm from the back.
#### 7. Screw the MOBO standoffs and MOBO
**Note:** Leave ~100mm on both sides.
#### 8. Screw the PSUs to the main frame
#### 9. Screw the raiser beam using the M6 screws, 150mm+500mm profiles and the two 2020 Corner Connectors to the frame using Right Angle Brackets
**Note:** 100mm from the front.
#### 10. Screw the Raiser Rails to the beam using M4 screws
**Note:** Place the first one by the left edge and then space other ones 44mm apart.
#### 11. Screw the GPU Bracket Rails to the upper part of the frame
**Note:** Place the first one by the right edge and then space other ones 55mm apart.
#### 12. Screw the raisers to the Raiser Rails with M3 screws
#### 13. Wire up the raiser data cables
**Note:** Don't tie the cables yet, that's the last step.
#### 14. Wire up the raiser and MOBO power cables
#### 15. Place all the GPUs and screw them to the GPU Bracket Rails
#### 16. Wire up GPU power cables
#### 17. Boot up and check if everything works correctly
#### 18. Use zip ties to clean up the cables
I recommend using [ethOS](http://ethosdistro.com) to manage your rigs. The setup very easy and fast saving a ton of work when configuring / managing more GPUs.
## 3rd Party Copyrights
Components in `parts_others` directory have been designed by following people:
* [2020 Corner Connector](https://www.thingiverse.com/thing:1100779) by [woodywong](https://www.thingiverse.com/woodywong/about)
* [Right Angle Bracket](https://www.thingiverse.com/thing:1810199) by [DCGTek](https://www.thingiverse.com/dcgtek/about)
* [T Slot nut](https://www.thingiverse.com/thing:1573410) by [Tomasz Mankiewicz](https://www.thingiverse.com/tomaq/about)