https://github.com/taylorfinnell/xmcosy-esphome

https://github.com/taylorfinnell/xmcosy-esphome

Last synced: 11 days ago
JSON representation

• Host: GitHub
• URL: https://github.com/taylorfinnell/xmcosy-esphome
• Owner: taylorfinnell
• Created: 2023-12-03T01:27:07.000Z (about 1 year ago)
• Default Branch: master
• Last Pushed: 2023-12-03T01:33:24.000Z (about 1 year ago)
• Last Synced: 2024-10-25T02:04:37.885Z (about 2 months ago)
• Language: C++
• Size: 8.79 KB
• Stars: 0
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# xmcosy-esphome

A somewhat working component for the [XMCOSY+ Floor Lamp, 2400LM Smart RGBW LED Standing Lamp with Modern Double-Side Lighting](https://www.amazon.com/dp/B09QYFWJ61)

I flashed this device by desoldering the chip (WB2S), attching to the correct pins, and used `ltchiptool` to flash. Then I soldered

the chip back. Sadly I messed up the stock firmware before I could get a dump. The PCB is in the lamp head and is pretty annoying to get to.

The lamp comes with two lights, an RGB light and a white light. Through the Tuya app you can control both lights individually

and they can both be on at the same time. Neither the Tuya local, Tuya, or smartlife integration seemed to give me this 

same control. In the aforementioned integrations only one light could be on at a time.

This component exposes two lights allowing them to be controlled individually and can both be on at the same time.

This Tuya device has a datapoint that (AFAIK) is not well documented. The data point is called `mix_rgbcw` and contains

the `HSVBT` (hue, saturation, value, brightess, white temp) values (each 2 bytes)

It can get out of sync if the light is controlled manually and has some other issues, but it works well enough to use I think.

```yaml

# example configuration:

tuya:

uart:

  baud_rate: 9600

  tx_pin: TX1

  rx_pin: RX1

button:

  - platform: restart

    name: "Restart"

switch:

  - platform: tuya

    switch_datapoint: 20

    name: Power

xmcosy:

light:

  - platform: xmcosy

    name: RGB

    color_type: RGB

    data_point_id: 51

  - platform: xmcosy

    name: White

    color_type: WHITE

    data_point_id: 51

```