https://github.com/techniker/openverioiq

VerioIQ blood glucose meter
https://github.com/techniker/openverioiq

Last synced: about 2 months ago
JSON representation

VerioIQ blood glucose meter

• Host: GitHub
• URL: https://github.com/techniker/openverioiq
• Owner: techniker
• Created: 2012-08-16T23:56:41.000Z (over 12 years ago)
• Default Branch: master
• Last Pushed: 2012-08-17T00:50:00.000Z (over 12 years ago)
• Last Synced: 2023-03-11T08:26:57.940Z (almost 2 years ago)
• Size: 129 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 1
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
Documentation, tools and software for the OneTouch VerioIQ blood glucose meter

Bjoern Heller  (c) 2012

This Software is licensed under GNU/GPL

### Hardware ###

CPU: TI MSP430F2618T, 80-Pin PN Package

Battery: 3.4V 147mAh 0.54Wh LithiumPolymer

Charge/Data: MiniUSB

Display: TFT8K4800FPC-A1-E (LED backlight)

Light: Two front facing warm-white smd-LED's

Comes usually with USB wall-plug-charger.

Pictures here:

http://www.flickr.com/photos/hellercom/sets/72157630442471414/

### Device pinout ###

These pins are accessible through holes in the back of the device.

Beginning from left (TP 97)

1 - Battery (White battery cable) - middle pin

2 - TMS 	(cpu pin 72)

3 - TDI/TCCK	(cpu pin 71)

4 - TDO/TDI	(cpu pin 70)

5 - RST/NMI	(cpu pin 74)

6 - TCK		(cpu pin 73)

7 - ? unknown

8 - VCC/AVCC 	(cpu pin 80)

9 - GND/DV	(cpu pin 52/(53))

### Debugger used ###

MSP-FET430UIF

### Programming ###

The debugger indicates that the security fuse has been blown on the MSP430 cpu.

Fixing this with the "flash-bsl" command and doing a full-erase had no success

while I tried.

I'll try a few things the following days.

It seems, that the cpu already starts its application code before the debugger

can send the erase command.

Debugger output:

Open UIF on /dev/ttyUSB0...

Initializing FET...

FET protocol version is 20409001

Configured for JTAG (2)

Set Vcc: 3000 mV

fet: FET returned error code 4 (Could not find device (or device not supported))

fet: command C IDENT1 failed

fet: identify failed

Trying again...

Initializing FET...

FET protocol version is 20409001

Configured for JTAG (2)

Sending reset...

fet: FET returned error code 30 (Could not access device - security fuse is blown)

warning: fet: reset failed

Set Vcc: 3000 mV

fet: FET returned error code 4 (Could not find device (or device not supported))

fet: command C IDENT1 failed

fet: identify failed

###