https://github.com/tedder/tamiya_robot_tiger_upgrades
Arduino and 3D printed upgrades for a Tamiya robot tiger
https://github.com/tedder/tamiya_robot_tiger_upgrades
Last synced: about 2 months ago
JSON representation
Arduino and 3D printed upgrades for a Tamiya robot tiger
- Host: GitHub
- URL: https://github.com/tedder/tamiya_robot_tiger_upgrades
- Owner: tedder
- License: other
- Created: 2018-12-31T00:12:03.000Z (over 7 years ago)
- Default Branch: master
- Last Pushed: 2018-12-31T00:12:20.000Z (over 7 years ago)
- Last Synced: 2025-03-04T09:27:39.118Z (over 1 year ago)
- Language: C++
- Size: 20.5 KB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
Stash for bare-bones upgrades for a Tamiya 'robot tiger'. Will link to vid and such when they are up.
Code is released under the MIT license, design files are CC-BY-NC; see LICENSE file.
# arduino code
Designed for an ATTINY85, which has rudimentary analog/pwm/timer support. It has blinking/breathing eyes, a red 'on LED' (which I tried to get to do more and failed), a button to start the walking (delay 1sec, then slowly ramps up to 100% speed, stops at 10sec), and of course motor driver through a MOSFET.
# 3d files
There's a "shell" (body over the battery and such) and a attiny mount, which is shaped for the piece of breadboard that I ended up with (..which was sized with a hacksaw, so it isn't anything special).