https://github.com/teknoir/sustayn_os_patch_001
Patch for the first 81 devices
https://github.com/teknoir/sustayn_os_patch_001
Last synced: 7 months ago
JSON representation
Patch for the first 81 devices
- Host: GitHub
- URL: https://github.com/teknoir/sustayn_os_patch_001
- Owner: teknoir
- Created: 2021-02-17T19:19:14.000Z (over 4 years ago)
- Default Branch: main
- Last Pushed: 2021-03-12T21:45:03.000Z (over 4 years ago)
- Last Synced: 2025-01-30T08:43:01.618Z (9 months ago)
- Language: Shell
- Size: 9.77 KB
- Stars: 0
- Watchers: 3
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Patch 001
In the terminal(SSH) enter the following command to apply the patch:
```
bash <(curl -Ls https://raw.githubusercontent.com/teknoir/sustayn_os_patch_001/main/bootstrap.sh)
```
And reboot:
```
sudo reboot
```
# Make space patch 001
This patch is to be run after reboot, just to make sure it runs on containerd first, as this will remove docker.
In the terminal(SSH) enter the following command to free up enough space:
```
bash <(curl -Ls https://raw.githubusercontent.com/teknoir/sustayn_os_patch_001/main/make_space_patch_001.sh)
```
## Troubleshooting
The patch in itself is idempotent, so if it would be interrupted it can be run again and it should end up in the correct state.
But, if there is repeated problems executing this long operation, due to terminal session being interrupted. The
patch can be run inside a screen session.
To install screen:
```
apt-get install -y screen
```
Start, or reconnect to, the screen session:
```
screen -R patch001
```
Then run the patch inside the screen session, and it will continue to run even if the terminal connection is broken.
You can go back and reattach to the session with the same command to see it continue and see if it was successfully applied.
## Edit
The path is idempotent and has had tings added to it over time. The "mini" patch is no longer needed.
If called it will run the normal patch to apply the full fix.
### The obsolete mini Patch 001.1
We missed some settings for the ethernet interface and some nvidia drivers, the patch above is also patched to include this patch.
If the patch above is run from now on there should be no reason to use this mini patch
> This patch fix the eth0 interface settings and enable it to connect to the Axis camera.
In the terminal(SSH) enter the following command to apply the patch:
```
bash <(curl -Ls https://raw.githubusercontent.com/teknoir/sustayn_os_patch_001/main/mini_patch_001.1.sh)
```
And reboot:
```
sudo reboot
```