https://github.com/texitoi/midi-grid
https://github.com/texitoi/midi-grid
Last synced: about 1 year ago
JSON representation
- Host: GitHub
- URL: https://github.com/texitoi/midi-grid
- Owner: TeXitoi
- License: mit
- Created: 2021-07-21T19:32:37.000Z (almost 5 years ago)
- Default Branch: master
- Last Pushed: 2024-01-12T13:23:04.000Z (over 2 years ago)
- Last Synced: 2025-05-08T00:09:13.321Z (about 1 year ago)
- Language: Rust
- Size: 422 KB
- Stars: 5
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# Midi grid [](https://travis-ci.com/TeXitoi/midi-grid)
A firmware for [Keyberon grid
60](https://github.com/TeXitoi/keyberon-grid) to make a midi
keyboard. The layout is an isomorphic layout similar to the
[Striso](https://www.striso.org/), which is similar to the
[Wicki-Hayden
layout](https://en.wikipedia.org/wiki/Wicki%E2%80%93Hayden_note_layout).
## Compiling and flashing
For easy dfu flashing without a ST-Link v2, we use the [STM32duino
bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/).
First, install all the needed software:
```shell
curl https://sh.rustup.rs -sSf | sh
rustup target add thumbv7m-none-eabi
sudo apt-get install dfu-util
```
Compile the firmware:
```shell
cd midi-grid
cargo objcopy --release -- -O binary midi-grid.bin
```
Then, install the bootloader on the blue pill. After connecting the
blue pill with the ST-Link to the computer, type:
```shell
cd midi-grid
openocd -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -c "init; reset halt; stm32f1x mass_erase 0; program generic_boot20_pc13.bin exit 0x08000000"
```
Remove the ST-Link v2 and plug the blue pill with a USB cable to your
computer. It should now be in DFU mode. Now, flash the firmware:
```shell
cd midi-grid
sudo dfu-util -w -d 1eaf:0003 -a 2 -D midi-grid.bin
```