https://github.com/thecaptaincraken/ohmscript

OhmScript is a interpreted scripting language to help you calculate the equivalent resistance of multiple resistors.
https://github.com/thecaptaincraken/ohmscript

Last synced: about 1 month ago
JSON representation

OhmScript is a interpreted scripting language to help you calculate the equivalent resistance of multiple resistors.

• Host: GitHub
• URL: https://github.com/thecaptaincraken/ohmscript
• Owner: TheCaptainCraken
• License: mit
• Created: 2024-11-27T19:50:27.000Z (about 2 months ago)
• Default Branch: master
• Last Pushed: 2024-11-27T19:53:40.000Z (about 2 months ago)
• Last Synced: 2024-11-27T20:34:32.458Z (about 2 months ago)
• Language: Rust
• Homepage:
• Size: 0 Bytes
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE.txt

Awesome Lists containing this project

README

        
# OhmScript

>OhmScript is a interpreted scripting language to help you calculate the equivalent resistance of multiple resistors.

## Syntax

This is an example OhmScript:

```ohmscript

R1 = 1k

R2 = 220

R3 = 300

? = //(R1,R2, R3)

R4 = 100k

? = //(R2, ->(R3, R4), R3)

```

*This prints `112.62798634812287` and `126.76266707517904`*

There are just a few operators in OhmScript:

- `=`: this is the assign operator. It binds a name to a value.

- `?`: this is a special name, everything assigned to it gets evaluated and printed.

- `//`: this is the parallel operator. `//(R1, R2)` is equivalent to $\frac{R_1 \cdot R_2}{R_1 + R_2}$.

- `->`: this is the series operator. `->(R1, R2)` is equivalent to $R_1 + R_2$.

In OhmScript, instead of writing `A = 225000`, you can use the `k` shorthand: `A=225k`.

## How to use it

>[!important]

>You must have the rust language installed on your system

Using OhmScript is as simple as:

```bash

git clone https://github.com/TheCaptainCraken/ohmscript

cd ohmscript

cargo run

```

At this point you should see the prompt:

```plain

Ohm >

```

Just start typing!