https://github.com/timhanewich/deceleration-strobe

Code behind a GPS-aware strobe light system I made for my motorcycle, with 3D-printed housing.
https://github.com/timhanewich/deceleration-strobe

gps micropython motorcycle strobe

Last synced: about 7 hours ago
JSON representation

Code behind a GPS-aware strobe light system I made for my motorcycle, with 3D-printed housing.

• Host: GitHub
• URL: https://github.com/timhanewich/deceleration-strobe
• Owner: TimHanewich
• Created: 2023-09-05T20:56:28.000Z (over 1 year ago)
• Default Branch: master
• Last Pushed: 2023-09-19T18:29:20.000Z (over 1 year ago)
• Last Synced: 2024-11-18T23:12:08.023Z (2 months ago)
• Topics: gps, micropython, motorcycle, strobe
• Language: Python
• Homepage:
• Size: 19.5 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: readme.md

Awesome Lists containing this project

README

        
## Included in Component box

- Raspberry Pi Pico

- Rocker switch

- 1S LiPo battery

- Transistor

- MT3608 DC-DC converter, set to 12V

- NEO-6M GPS Module

## Basic Measurements

- Raspberry Pi Pico: 21mm wide, 51mm high, 3mm thick

- Rocker switch: 22.5mm in diameter, but should make the hole 21 mm in diameter so it fits in and rests on lip. 25mm deep (from lip to bottom of rocker switch)

- MT3608: 37.5mm wide, 17.5mm high, 7mm thick at peak (blue cover)

- TIP41C transistor: 29mm high, 10mm wide, 4mm thick

- 1S LiPo battery: 60mm long, 18mm wide, 8.5mm thick

- NEO-6M: 27.5mm x 27.5mm, 4mm thick