Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/tohojo/sqm-scripts

SQM scripts traffic shaper
https://github.com/tohojo/sqm-scripts

openwrt router sqm traffic-shaping

Last synced: 4 days ago
JSON representation

SQM scripts traffic shaper

Awesome Lists containing this project

README 

        
# The sqm-scripts traffic shaper



[![DOI](https://zenodo.org/badge/36661217.svg)](https://zenodo.org/badge/latestdoi/36661217)



This repository contains the sqm-scripts traffic shaper from the CeroWrt

project. See:

http://www.bufferbloat.net/projects/cerowrt/wiki/Smart_Queue_Management



## How does sqm-scripts set up traffic shaping?



sqm-scripts uses the Linux qdisc mechanism to configure traffic shaping and

scheduling. Either by a combination of the HTB qdisc (for shaping) and fq_codel

(for packet scheduling), or using the CAKE integrated scheduler to do both at

once.



Because qdiscs only see traffic as it is *leaving* an interface, for ingress

shaping sqm-scripts sets up an IFB device. Incoming packets are redirected to

this device where a regular qdisc can handle them. The IFB device is named for

the egress interface it is paired with, so the IFB for 'eth0' will be called

'ifb4eth0'.



This is all illustrated on the following diagram:



![qdisc diagram](qdisc-diagram.png)

Diagram contributed by Matt Taggart (@taggart). Source in [qdisc-diagram.dia](qdisc-diagram.dia).



## Requirements



To run sqm-scripts you just need a Linux machine with a kernel from the last

decade or so (any of the longterm releases on kernel.org should work - please

don't run a kernel that is not a currently released version, longterm or

current). The only exception is that if you want to use the `cake` qdisc, you

either need kernel 4.19 or newer (with matching `iproute2` version), or you need

to build CAKE yourself from the out-of-tree repository at

https://github.com/dtaht/sch_cake.



## Installing

`sudo make install` should install things on a regular Linux box. For

OpenWrt, there are packages available in the distribution, so just install the

sqm-scripts package, and optionally luci-app-sqm for GUI support.



## Running on regular Linux distributions

After installing using `make install`, do the following to enable sqm-scripts:



1. Copy `/etc/sqm/default.conf` to `/etc/sqm/.iface.conf` where `` is

   the name of the interface you wish to run sqm-scripts on. Then adjust the

   values in the file to your environment, setting at least UPLINK, DOWNLINK,

   and possibly SCRIPT.



2. If you're on a Debian-derived distribution that uses old-style network config

   in `/etc/network/`, the Makefile should detect this and drop in appropriate

   hotplug scripts, so sqm-script should automatically run on the next 'ifup'.



3. If you're on a systemd-enabled distro, just enable the `sqm@` service

   corresponding to your interface name. E.g., for `eth0`, issue `systemctl

   enable sqm@eth0` (and run `systemctl start sqm@eth0` to start sqm-scripts

   immediately).



## "Installing" the current development version from git on OpenWrt



Run the steps below on your own computer (not on the router) to retrieve the newest script version from this repository, create the scripts, then copy those new scripts to your router.



1. Make a local clone of the git repository (if you have not already):



    `git clone https://github.com/tohojo/sqm-scripts`



2. Change into the new directory:



    `cd ./sqm-scripts`



3. Make sure the source is updated:



    `git pull`



4. Create the scripts for your platform (PLATFORM is either linux or openwrt) and output them to a local `current_sqm_base` directory:



    `make install PLATFORM=openwrt DESTDIR=./current_sqm_base`



5. Change to `./current_sqm_base`:



    `cd ./current_sqm_base`



6. Optional for OpenWrt: The final step will overwrite your router's current sqm configuration file (at `/etc/config/sqm`). If you want to preserve the current configuration, delete the newly created config file from the local `etc/config`:



    `rm -r etc/config`



7. Now, use scp to copy the new scripts to the router. Change `$YOUR.SQM.HOSTNAME` to the address/DNS name for your computer - probably `192.168.1.1` or on cerowrt `gw.hom.lan`. If your account on the router is not "root", change "root" to your account:



    `scp -r ./* root@$YOUR.SQM.HOSTNAME:/`



Note this method relies on the presence of the required qdiscs on the router/destination host. On openwrt, you should first install the "normal" sqm-scripts package to take care of all the dependencies, then use this procedure to update to the newest sqm-scripts.



## Run-time debugging



SQM_VERBOSITY_MAX controls the verbosity of sqm's output to the shell and syslog (0: no logging; 8: full debug output).

SQM_DEBUG controls whether sqm will log the output of the last invocation of start-sqm into  `var/run/sqm/${interface_name}.start-sqm.log` and the ouput of the last invocation of stop-sqm into `var/run/sqm/${interface_name}.stop-sqm.log` e.g. for pppoe-wan `/var/run/sqm/pppoe-wan.start-sqm.log` and `/var/run/sqm/pppoe-wan.stop-sqm.log`.



#### Examples



- Log only the binary invocations and their output:



    `/etc/init.d/sqm stop ; SQM_DEBUG=1 SQM_VERBOSITY_MAX=0 /etc/init.d/sqm start`



- Log verbose debug output and all the binary invocations and their output:



    `/etc/init.d/sqm stop ; SQM_DEBUG=1 SQM_VERBOSITY_MAX=8 /etc/init.d/sqm start`



- Log both start and stop:



    `SQM_DEBUG=1 SQM_VERBOSITY_MAX=8 /etc/init.d/sqm stop ; SQM_DEBUG=1 SQM_VERBOSITY_MAX=8 /etc/init.d/sqm start`



Note: Both the start and stop log are re-written on every sqm instance start and stop and are logging all output independent of the value of `SQM_VERBOSITY_MAX`. They will not grow indefintely, but they are written repeatedly. On reliably rewritable media like hard disk, ssd, flash with wear-leveling, or ram-disk, `SQM_DEBUG` can be safely set to 1 in `defaults.sh`, but on media like NOR flash that do only allow few write-cycles, keeping the default at 0 and using the above invocations to run a single instance with `SQM_DEBUG=1` is recommended.