Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/toptal/active-job-style-guide
This Background Jobs style guide is a list of best practices working with Ruby background jobs.
https://github.com/toptal/active-job-style-guide
activejob sidekiq style-guide
Last synced: 3 months ago
JSON representation
This Background Jobs style guide is a list of best practices working with Ruby background jobs.
- Host: GitHub
- URL: https://github.com/toptal/active-job-style-guide
- Owner: toptal
- Created: 2019-07-30T22:59:48.000Z (over 5 years ago)
- Default Branch: master
- Last Pushed: 2023-09-16T12:12:26.000Z (about 1 year ago)
- Last Synced: 2024-04-27T07:33:27.865Z (6 months ago)
- Topics: activejob, sidekiq, style-guide
- Size: 19.5 KB
- Stars: 467
- Watchers: 126
- Forks: 19
- Open Issues: 1
-
Metadata Files:
- Readme: README.adoc
Awesome Lists containing this project
README
= Active Job Style Guide
:idprefix:
:idseparator: -
:sectanchors:
:sectlinks:
:toc: preamble
:toclevels: 1
ifndef::backend-pdf[]
:toc-title: pass:[
Table of Contents
]
endif::[]
:source-highlighter: rouge
This style guide is a list of best practices working with Ruby background jobs using Active Job with Sidekiq backend.
Despite the common belief, they work quite well together if you follow the guidelines.
Sidekiq may be used without Active Job, but the latter adds transparency and a useful serialization layer.
This style guide didn't appear out of thin air - it is based on the professional experience of the editors, official documentation, and suggestions from members of the Ruby community.
Those guidelines help to avoid numerous pitfalls.
Depending on the usage of background jobs, some guidelines might apply, and some not.
ifdef::env-github[]
You can generate a PDF copy of this guide using https://asciidoctor.org/docs/asciidoctor-pdf/[AsciiDoctor PDF], and an HTML copy https://asciidoctor.org/docs/convert-documents/#converting-a-document-to-html[with] https://asciidoctor.org/#installation[AsciiDoctor] using the following commands:
[source,shell]
----
# Generates README.pdf
asciidoctor-pdf -a allow-uri-read README.adoc
# Generates README.html
asciidoctor
----
[TIP]
====
Install the `rouge` gem to get nice syntax highlighting in the generated document.
[source,shell]
----
gem install rouge
----
====
endif::[]
[#general]
== General Recommendations
[#active-record-models-as-arguments]
=== Active Record Models as Arguments
Pass Active Record models as arguments; do not pass by id.
Active Job automatically serializes and deserializes Active Record models using https://edgeguides.rubyonrails.org/active_job_basics.html#globalid[GlobalID], and manual deserialization of the models is not necessary.
GlobalID handles model class mismatches properly.
Deserialization errors are reported to error tracking.
[source,ruby]
----
# bad - passing by id
# Deserialization error is reported, the job *is* scheduled for retry.
class SomeJob < ApplicationJob
def perform(model_id)
model = Model.find(model_id)
do_something_with(model)
end
end
# bad - model mismatch
class SomeJob < ApplicationJob
def perform(model_id)
Model.find(model_id)
# ...
end
end
# Will try to fetch a Model using another model class, e.g. User's id.
SomeJob.perform_later(user.id)
# acceptable - passing by id
# Deserialization error is reported, the job is *not* scheduled for retry.
class SomeJob < ApplicationJob
def perform(model_id)
model = Model.find(model_id)
do_something_with(model)
rescue ActiveRecord::RecordNotFound
Rollbar.warning('Not found')
end
end
# good - passing with GlobalID
# Deserialization error is reported, the job is *not* scheduled for retry.
class SomeJob < ApplicationJob
def perform(model)
do_something_with(model)
end
end
----
WARNING: Do not replace one style with another, use a transitional period to let all jobs scheduled with ids to be processed.
Use a helper to temporarily support both numeric and GlobalID arguments.
[source,ruby]
----
class SomeJob < ApplicationJob
include TransitionHelper
def perform(model)
# TODO: remove this when all jobs with numeric id arguments are processed
model = fetch(model, Model)
do_something_with(model)
end
end
module TransitionHelper
def fetch(id_or_object, model_class)
case id_or_object
when Numeric
model_class.find(id_or_object)
when model_class
id_or_object
else
fail "Object type mismatch #{model_class}, #{id_or_object}"
end
end
end
----
[#queue-assignments]
=== Queue Assignments
Explicitly specify a queue to be used in job classes.
Make sure the queue is on the https://github.com/mperham/sidekiq/wiki/Advanced-Options#queues[list of processed queues].
Putting all jobs into one basket comes with a risk of more urgent jobs being executed with a significant delay.
Do not put slow and fast jobs together in one queue.
Do not put urgent and non-urgent jobs together in one queue.
[source,ruby]
----
# bad - no queue specified
class SomeJob < ApplicationJob
def perform
# ...
end
end
# bad - the wrong queue specified
class SomeJob < ApplicationJob
queue_as :hgh_prioriti # nonexistent queue specified
def perform
# ...
end
end
# good
class SomeJob < ApplicationJob
queue_as :high_priority
def perform
# ...
end
end
----
[#idempotency]
=== Idempotency
Ideally, jobs should be idempotent, meaning there should be no bad side effects of them running more than once.
Sidekiq only guarantees that the jobs will run https://github.com/mperham/sidekiq/wiki/Best-Practices#2-make-your-job-idempotent-and-transactional[at least once], but not necessarily exactly once.
Even jobs that do not fail due to errors https://github.com/mperham/sidekiq/wiki/FAQ#what-happens-to-long-running-jobs-when-sidekiq-restarts[might be interrupted] during https://github.com/mperham/sidekiq/wiki/Deployment#overview[non-rolling-release deployments].
[source,ruby]
----
class UserNotificationJob < ApplicationJob
def perform(user)
send_email_to(user) unless already_notified?(user)
end
end
----
[#atomicity]
=== Atomicity
During deployment, a job is given 25 seconds to complete by default.
After that, the worker is terminated and the job is sent back to the queue.
This might result in part of the work being executed twice.
Make the jobs atomic, i.e., all or nothing.
[#threads]
=== Threads
Do not use threads in your jobs.
Spawn jobs instead.
Spinning up a thread in a job leads to opening a new database connection, and the connections are easily exhausted, up to the point when the webserver is down.
[source,ruby]
----
# bad - consumes all available connections
class SomeJob < ApplicationJob
def perform
User.find_each |user|
Thread.new do
ExternalService.update(user)
end
end
end
end
# good
class SomeJob < ApplicationJob
def perform(user)
ExternalService.update(user)
end
end
User.find_each |user|
SomeJob.perform_later(user)
end
----
[#retries]
=== Retries
Avoid using https://edgeguides.rubyonrails.org/active_job_basics.html#exceptions[ActiveJob's built-in `retry_on`] or `ActiveJob::Retry` (`activejob-retry` gem).
Use Sidekiq retries, which are also available from within Active Job with Sidekiq 6+.
Do not hide or extract job retry mechanisms.
Keep retries directives visible in the jobs.
[source,ruby]
----
# bad - makes three attempts without submitting to Rollbar,
# fails and relies on Sidekiq's retry that would also make several
# retry attempts, submitting each of the failures to Rollbar.
class SomeJob < ApplicationJob
retry_on ThirdParty::Api::Errors::SomeError, wait: 1.minute, attempts: 3
def perform(user)
# ...
end
end
# bad - it's not clear upfront if the job will be retried or not
class SomeJob < ApplicationJob
include ReliableJob
def perform(user)
# ...
end
end
# good - Sidekiq deals with retries
class SomeJob < ApplicationJob
sidekiq_options retry: 3
def perform(user)
# ...
end
end
----
==== Batches
Always use retries for jobs that are executed in batches, otherwise, the batch will never succeed.
[#use-retries]
=== Use Retries
Use the retry mechanism.
Do not let jobs end up in Dead Jobs.
Let Sidekiq retry the jobs, and don't spend time re-running the jobs manually.
[#mind-transactions]
=== Mind Transactions
Background processing of a scheduled job may happen sooner than you expect.
Make sure to https://github.com/mperham/sidekiq/wiki/Problems-and-Troubleshooting#cannot-find-modelname-with-id12345[only schedule jobs when the transaction has been committed].
[source,ruby]
----
# bad - job may perform earlier than the transaction is committed
User.transaction do
users_params.each do |user_params|
user = User.create!(user_params)
NotifyUserJob.perform_later(user)
end
end
# good
users = User.transaction do
users_params.map do |user_params|
User.create!(user_params)
end
end
users.each { |user| NotifyUserJob.perform_later(user) }
----
[#local-performance-testing]
=== Local Performance Testing
Due to Rails auto-reloading, Sidekiq jobs are executed one-by-one, with no parallelism.
That may be confusing.
Run Sidekiq in an environment that has `eager_load` set to `true`, or with the following flags to circumvent this behavior:
[source,sh]
----
EAGER_LOAD=true ALLOW_CONCURRENCY=true bundle exec sidekiq
----
[#critical-jobs]
=== Critical Jobs
Background job processing may be down for a prolonged period (minutes), e.g. during a failed deployment or a burst of other jobs.
Consider running time-critical and mission-critical jobs in-process.
[#business-logic-in-jobs]
=== Business Logic in Jobs
Do not put business logic to jobs; extract it.
[source, ruby]
----
# bad
class SendUserAgreementJob < ApplicationJob
# Convenient method to check if preconditions are satisfied to avoid
# scheduling unnecessary jobs.
def self.perform_later_if_applies(user)
job = new(user)
return unless job.satisfy_preconditions?
job.enqueue
end
def perform(user)
@user = user
return unless satisfy_preconditions?
agreement = agreement_for(user: user)
AgreementMailer.deliver_now(agreement)
end
def satisfy_preconditions?
legal_agreement_signed? &&
!user.removed? &&
!user.referral? &&
!(user.active? || user.pending?) &&
!user.has_flag?(:on_hold)
end
private
attr_reader :user
# business logic
end
# good - business logic is not coupled to the job
class SendUserAgreementJob < ApplicationJob
def perform(user)
agreement = agreement_for(user: user)
AgreementMailer.deliver_now(agreement)
end
end
SendUserAgreementJob.perform_later(user) if satisfy_preconditions?
----
[#scheduling-a-job-from-a-job]
=== Scheduling a Job from a Job
Weigh the pros and cons in each case, whether to schedule jobs from jobs or to execute them in-process.
Factors to consider:
Is it a retriable job?
Can inner jobs fail?
Are they idempotent?
Is there anything in the host job that may fail?
[source,ruby]
----
# good - error kernel pattern
# bad - additional jobs are spawned
class SomeJob < ApplicationJob
def perform
SomeMailer.some_notification.deliver_later
OtherJob.perform_later
end
end
# good - no additional jobs
# bad - if `OtherJob` fails, `SomeMailer` will be re-executed on retry as well
class SomeJob < ApplicationJob
def perform
SomeMailer.some_notification.deliver_now
OtherJob.perform_now
end
end
----
==== Numerous Jobs
When a lot of jobs should be performed, it's acceptable to schedule them.
Consider using batches for improved traceability.
Also, specify the same queue for the host job and sub-jobs.
[source,ruby]
----
# acceptable
def perform
batch = Sidekiq::Batch.new
batch.description = 'Send weekly reminders'
batch.jobs do
User.find_each do |user|
WeeklyReminderJob.perform_later(user)
end
end
end
----
[#job-renaming]
=== Job Renaming
Carefully rename job classes to avoid situations with jobs are scheduled, but there's no class to process it.
NOTE: This also relates to mailers used with `deliver_later`.
[source,ruby]
----
# good - keep the old class
# TODO: Delete this alias in a few weeks when old jobs are safely gone
OldJob = NewJob
----
[#sleep]
=== `sleep`
Do not use `Kernel.sleep` in jobs.
`sleep` blocks the worker thread, and it's not able to process other jobs.
Re-schedule the job for a later time, or use limiters with a custom exception.
[source,ruby]
----
# bad
class SomeJob < ApplicationJob
def perform(user)
attempts_number = 3
ThirdParty::Api::User.renew(user.external_id)
rescue ThirdParty::Api::Errors::TooManyRequestsError => error
sleep(error.retry_after)
attempts_number -= 1
retry unless attempts_number.zero?
raise
end
end
# good - retry job in a while, a limited number of times
class SomeJob < ApplicationJob
sidekiq_options retry: 3
sidekiq_retry_in do |count, exception|
case exception
when ThirdParty::Api::Errors::TooManyRequestsError
count + 1 # i.e. 1s, 2s, 3s
end
end
def perform(user)
ThirdParty::Api::User.renew(user.external_id)
end
end
# good - fine-grained control of API usage in jobs
class SomeJob < ApplicationJob
def perform(user)
LIMITER.within_limit do
ThirdParty::Api::User.renew(user.external_id)
end
end
end
# config/initializers/sidekiq.rb
Sidekiq::Limiter.configure do |config|
config.errors << ThirdParty::Api::Errors::TooManyRequestsError
end
----
[#infrastructure]
== Infrastructure
[#one-process-per-core]
=== One Process per Core
On multi-core machines, run as many Sidekiq processes as needed to fully utilize cores.
Sidekiq process only uses one CPU core.
A rule of thumb is to run as many processes as there are cores available.
[#redis-memory-constraints]
=== Redis Memory Constraints
Redis's database size is limited by server memory.
Some prefer to explicitly set `maxmemory`, and in combination with a `noeviction` policy, this may result in errors on job scheduling.
==== Dead Jobs
Do not keep jobs in Dead Jobs.
With extended backtrace enabled for Dead Jobs, a single dead job can occupy as much as 20KB in the database.
Re-run the jobs once the root cause is fixed, or delete them.
==== Excessive Arguments
Do not pass an excessive number of arguments to a job.
[source,ruby]
----
# bad
SomeJob.perform_later(user_name, user_status, user_url, user_info: huge_json)
# good
SomeJob.perform_later(user, user_url)
----
==== Hordes
Do not schedule hundreds of thousands jobs at once.
A single job with no parameters takes 0.5KB.
Measure the exact footprint for each job with its arguments.
[#monitoring]
=== Monitoring
Monitor the server and store historical metrics.
Properly configured metrics will provide answers to improve the throughput of job processing.
[#commercial-features]
== Commercial Features
At some scale, https://github.com/mperham/sidekiq/wiki/Build-vs-Buy[it pays out to use commercial features].
Some commercial features are available as third-party add-ons.
However, their reliability is in most cases questionable.
[#use-batches]
=== Use Batches
Group jobs related to one task using https://github.com/mperham/sidekiq/wiki/Batches[Sidekiq Batches].
Batch's `jobs` method is atomic, i.e., all the jobs are scheduled together, in an all-or-nothing fashion.
[source,ruby]
----
# bad
class BackfillMissingDataJob < ApplicationJob
def self.run_batch
Model.where(attribute: nil).find_each do |model|
perform_later(model)
end
end
def perform(model)
# do the job
end
end
# good
class BackfillMissingDataJob < ApplicationJob
def self.run_batch
batch = Sidekiq::Batch.new
batch.description = 'Backfill missing data'
batch.on(:success, BackfillComplete, to: SysAdmin.email)
batch.jobs do
Model.where(attribute: nil).find_each do |model|
perform_later(model)
end
end
end
def perform(model)
# do the job
end
end
----
[#self-scheduling-jobs]
=== Self-scheduling Jobs
Avoid using self-scheduling jobs for long-running jobs.
Prefer using Sidekiq Batches to split the workload.
[source,ruby]
----
# bad
class BackfillMissingDataJob < ApplicationJob
SIZE = 20
def perform(offset = 0)
models = Model.where(attribute: nil)
.order(:id).offset(offset).limit(SIZE)
return if models.empty?
models.each do |model|
model.update!(attribute: for(model))
end
self.class.perform_later(offset + SIZE)
end
end
# good
class BackfillMissingDataJob < ApplicationJob
def self.run_batch
Sidekiq::Batch.new.jobs do
Model.where(attribute: nil)
.find_in_batches(20) do |models|
BackfillMissingDataJob.perform_later(models)
end
end
end
def perform(models)
models.each do |model|
model.update!(attribute: for(model))
end
end
end
----
[#api-rate-limited-operations]
=== API Rate-limited Operations
Most third-party APIs have usage limits and will fail if there are too many calls in a period.
Use rate limiting in jobs that make such external calls.
Never rely on the number of jobs to be executed.
Even if you schedule jobs to be executed at a specific moment, they might be executed all at once, due to, e.g., a traffic jam in job processing.
Use https://github.com/mperham/sidekiq/wiki/Ent-Rate-Limiting[Enterprise Rate Limiting].
Use the strategy (Concurrent, Bucket, Window) that is most suitable to the specific API rate limiting.
[source,ruby]
----
# bad
class UpdateExternalDataJob < ApplicationJob
def perform(user)
new_attribute = ThirdParty::Api.get_attribute(user.external_id)
user.update!(attribute: new_attribute)
end
end
User.where.not(external_id: nil)
.find_in_batches.with_index do |group_number, users|
users.each do |user|
UpdateExternalDataJob
.set(wait: group_number.minutes)
.perform_later(users)
end
end
# good
class UpdateExternalDataJob < ApplicationJob
LIMITER = Sidekiq::Limiter.window('third-party-attribute-update', 20, :minute, wait_timeout: 0)
def perform(user)
LIMITER.within_limit do
new_attribute = ThirdParty::Api.get_attribute(user.external_id)
user.update!(attribute: new_attribute)
end
end
end
# Application code
User.where.not(external_id: nil).find_each do |user|
UpdateExternalDataJob.perform_later(user)
end
# config/initializers/sidekiq.rb
Sidekiq::Limiter.configure do |config|
config.errors << ThirdParty::Api::Errors::TooManyRequestsError
end
----
[#default-limiter-backoff]
=== Default Limiter Backoff
Do not rely on Sidekiq's limiter backoff default.
It will reschedule the job in five minutes in the future.
[source,ruby]
----
DEFAULT_BACKOFF = ->(limiter, job) do
(300 * job['overrated']) + rand(300) + 1
end
----
It doesn't fit the cases when limits are released quickly or are kept for hours.
Configure it on a limiter basis.
[source,ruby]
----
Sidekiq::Limiter.configure do |config|
config.backoff = ->(limiter, job) do
case limiter.name
when 'daily-third-party-api-limit'
12.hours
else
(300 * job['overrated']) + rand(300) + 1 # fallback to default
end
end
end
----
Keep in mind how limiter comparison works.
Compare limiters by the name, not by the object.
[source,ruby]
----
Sidekiq::Limiter.bucket('custom-limiter', 1, :day) == Sidekiq::Limiter.bucket('custom-limiter', 1, :day) # => false
----
[#reuse-limiters]
=== Reuse Limiters
Create https://github.com/mperham/sidekiq/wiki/Ent-Rate-Limiting[limiters] once during startup and reuse them.
Limiters are thread-safe and designed to be shared.
Each limiter occupies 114 bytes in Redis, and the default TTL is 3 months.
1 million jobs a month using non-shared limiters will be constantly consuming 300MB in Redis.
[source,ruby]
----
# bad - limiter is re-created on each job call
class SomeJob < ApplicationJob
def perform(...)
limiter = Sidekiq::Limiter.concurrent('erp', 50, wait_timeout: 0, lock_timeout: 30)
limiter.within_limit do
# call ERP
end
end
end
# good
class SomeJob < ApplicationJob
ERP_LIMIT = Sidekiq::Limiter.concurrent('erp', 50, wait_timeout: 0, lock_timeout: 30)
def perform(...)
ERP_LIMIT.within_limit do
# call ERP
end
end
end
# acceptable - an exception is when the limiter is specific to something, and that is used as a distinction key in limiter name.
class SomeJob < ApplicationJob
def perform(user)
# Rate limiting is per user account
user_throttle = Sidekiq::Limiter.bucket("stripe-#{user.id}", 30, :second, wait_timeout: 0)
user_throttle.within_limit do
# call stripe with user's account creds
end
end
end
----
[#limiter-options]
=== Limiter Options
The usage of incorrect limiter options may break its behavior.
==== `wait_timeout`
Set `wait_timeout` to zero or some reasonably low value.
Doing otherwise will result in idle workers, while there might be jobs waiting in the queue.
Keep in mind the backoff configuration, and carefully pick the timing when the job is retried.
==== `lock_timeout` for Concurrent Limiter
Set `lock_timeout` to a longer than the job executes.
Otherwise, the lock will be released too early and more concurrent jobs will be executed than expected.
[#global-limiting-middleware]
=== Global Limiting Middleware
The `Sidekiq::Limiter::OverLimit` exception might be rescued by jobs to discard themselves from locally defined limiters.
To avoid interference between global throttle limiter middleware and local job limiters, wrap `Sidekiq::Limiter::OverLimit` exception in middleware.
[source,ruby]
----
# Middleware
class SaturationLimiter
SaturationOverLimit = Class.new(StandardError)
def self.wrapper(job, block)
LIMITER.within_limit { block.call }
rescue Sidekiq::Limiter::OverLimit => e
limiter_name = e.limiter.name
# Re-raise if an over the limit exception is coming from a limiter
# defined on the job level.
raise unless limiter_name == LIMITER.name
# Use a custom exception that Sidekiq::Limiter is using to re-schedule
# the job to a later time, but in a way that doesn't overlap with the
# limiters defined on the job level.
raise SaturationOverLimit, limiter_name
end
end
# config/initializers/active_job.rb
ActiveJob::Base.around_perform(&SidekiqLimiter.method(:wrapper))
----
[#ignore-overlimit]
=== Ignore `OverLimit` Exceptions on Third-party Services
`Sidekiq::Limiter::OverLimit` is an internal mechanism, and it doesn't make sense to report when it triggers.
[source,ruby]
----
# config/initializers/rollbar.rb
Rollbar.configure do |config|
config.exception_level_filters.merge!('Sidekiq::Limiter::OverLimit' => 'ignore')
end
----
[source,yaml]
----
# config/newrelic.yml
production:
error_collector:
enabled: true
ignore_errors: "Sidekiq::Limiter::OverLimit"
----
[#rolling-restarts]
=== Rolling Restarts
Use https://github.com/mperham/sidekiq/wiki/Ent-Rolling-Restarts[Enterprise Rolling Restarts].
With Rolling Restarts, deployments do not suffer from downtime.
Also, it prevents non-atomic and non-idempotent jobs from being interrupted and executed more than once on deployments.
WARNING: For Capistrano-style deployments make sure to use https://github.com/stripe/einhorn#re-exec[`--reexec-as`] and https://github.com/stripe/einhorn#options[`--drop-env-var BUNDLE_GEMFILE`] einhorn options to avoid stalled code and dependencies.
[#testing]
== Testing
[#perform]
=== `perform`
Don't use `job.perform` or `job_class.new.perform`, it bypasses the Active Job serialization/deserialization stage.
Use `job_class.perform_now`.
With the implicitly subject, and recommends against using `.perform` (that as you correctly mention is exclusively available on a job instance, not class):
[source,ruby]
----
# bad - `perform` method is called directly on an implicitly defined subject
RSpec.describe SomeJob do
# implicitly defined `subject` is `SomeJob.new`
it 'updates user status' do
expect { subject.perform(user) }.to change { user.status }.to(:updated) }
end
end
# bad - `perform` method is called directly on a job instance
RSpec.describe SomeJob do
it 'updates user status' do
expect { SomeJob.new.perform(user) }.to change { user.status }.to(:updated) }
end
end
# good
RSpec.describe SomeJob do
it 'updates user status' do
expect { SomeJob.perform_now(user) }.to change { user.status }.to(:updated) }
end
end
----
[#perform_later]
=== `perform_later`
Prefer `perform_now` to `perform_later` when testing jobs.
It doesn't involve Redis.
[source,ruby]
----
# bad - unnecessary roundtrip to Redis
RSpec.describe SomeJob do
it 'updates user status' do
expect do
SomeJob.perform_later(user)
perform_scheduled_jobs
end.to change { user.status }.to(:updated) }
end
end
# good
RSpec.describe SomeJob do
it 'updates user status' do
expect { SomeJob.perform_now(user) }.to change { user.status }.to(:updated) }
end
end
----
== History
This guide came to life as an internal company list of the best practices of working with ActiveJob and Sidekiq.
It is compiled from remarks collected from numerous code reviews, and during the migration from another background job processing tool to Sidekiq.
Initially created by https://github.com/pirj[Phil Pirozhkov]) with the help of colleagues, and sponsored by https://www.toptal.com[Toptal].
== Contributing
The guide is a work in progress.
Improving such guidelines is a great (and simple way) to help the Ruby community!
Nothing written in this guide is set in stone.
We desire to work together with everyone interested in gathering the best practices of working with background jobs.
The goal is to create a resource that will be beneficial to the entire Ruby community.
Feel free to open tickets or send pull requests with improvements.
Thanks in advance for your help!
=== How to Contribute
It's easy, just follow the contribution guidelines below:
* https://help.github.com/articles/fork-a-repo[Fork] on GitHub
* Make your feature addition or bug fix in a feature branch.
* Include a http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html[good description] of your changes
* Push your feature branch to GitHub
* Send a https://help.github.com/articles/using-pull-requests[Pull Request]
== License
image:https://i.creativecommons.org/l/by/3.0/88x31.png[Creative Commons License] This work is licensed under a http://creativecommons.org/licenses/by/3.0/deed.en_US[Creative Commons Attribution 3.0 Unported License]
== Spread the Word
A community-driven style guide is of little use to a community that doesn't know about its existence.
Tweet about the guide and share it with your friends and colleagues.
Every comment, suggestion, or opinion we get makes the guide just a little bit better.
And we want to have the best possible guide, don't we?