Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/vindolin/python-ebyte-e32
https://github.com/vindolin/python-ebyte-e32
Last synced: about 2 months ago
JSON representation
- Host: GitHub
- URL: https://github.com/vindolin/python-ebyte-e32
- Owner: vindolin
- License: mit
- Created: 2020-09-22T13:08:27.000Z (over 4 years ago)
- Default Branch: master
- Last Pushed: 2024-02-03T09:11:11.000Z (11 months ago)
- Last Synced: 2024-02-03T10:24:59.190Z (11 months ago)
- Language: Python
- Size: 45.9 KB
- Stars: 6
- Watchers: 3
- Forks: 2
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# Python 3 command line tool/library for controlling Ebyte LoRa modules like the E32 with GPIOs (Raspberry Pi).
## reading
```bash
usage: ebyte.py read [-h] serial pin_m0 pin_m1 pin_aux
positional arguments:
serial Path to the serial port device.
pin_m0 M0 GPIO pin number.
pin_m1 M1 GPIO pin number.
pin_aux AUX GPIO pin number.
optional arguments:
-h, --help show this help message and exit
python ebyte.py read /dev/serial0 27 17 22
```
```
Version:
--------
Frequency: 868MHz
Version: 13
Features: 20
Address/channel:
----------------
addh: 0x00
addl: 0x02
address: 0x0002
chan: 0x02
sped:
-----
parity_bit: 8N1 (0)
uart_baud: 19200 (3)
air_data_rate: 2.4k (2)
option:
-------
transmission_mode: fixed (1)
io_drive_mode: TXD, RXD and AUX open-collector (1)
wake_up_time: 250ms (0)
fec_switch: on (1)
transmission_power: 30dBm (0)
```
### writing
```python ebyte.py write /dev/serial0 27 17 22 --fec_switch=1 --chan=15```
### factory reset
```python ebyte.py reset /dev/serial0 27 17 22```
### use as library
See the code in test_raspberrypi.py if you want to use the library in your own code.
If you write to the serial device, just call ebyte.wait_for_aux_pin() after every write.
You can omit the AUX_PIN parameter, a delay is then used instead of waiting for the pin to go high.