Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/wiedehopf/tar1090

Provides an improved webinterface for use with ADS-B decoders readsb / dump1090-fa
https://github.com/wiedehopf/tar1090

1090 1090mhz ads-b adsb aircraft readsb rtl-sdr rtlsdr sdr webinterface

Last synced: 1 day ago
JSON representation

Provides an improved webinterface for use with ADS-B decoders readsb / dump1090-fa

Awesome Lists containing this project

README 

        
# Query parameters



- The query parameters are appended to the URL you would normally use for tar1090.

- Before the first query parameter a question mark ? is prepended, for each additional parameter an ampersand & is prepended.

- Example: http://192.168.x.yy/tar1090/?icao=456789&enableLabels&extendedLabels=2&trackLabels&zoom=11&mapDim=0.4



- Some parameters need a value. If no value if passed, the default one is used.

- Some parameters do not take a value. They are active if used in the URL.(hideSideBar, hideButtons, ...).

- Query parameters in tar1090 are not case sensitive.



## Search / filter



- icao=icao - selects and isolates the selected plane(s). Separate multiple with commas.

- noIsolation - show other planes and not only the ones selected by ?icao

- icaoFilter=hex1,hex2,hex3 - Only show the mentioned hex IDs, no other aircraft will ever be displayed

- icaoBlacklist=hex1,hex2,hex3 - Never show the mentioned hex IDs

- reg=registration - Direct link to specific aircraft registration(s). Separate multiple with commas. ?icao is preferred as this option takes longer to load.

- filterAltMin=500 - filter minimum altitute to 500 ft

- filterAltMax=5000 - filter maximum altitute to 5000 ft

- filterCallSign=^(UAL|DAL) - filter callsign to United or Deleta

- filterType=B738 - filter to aircraft type code B738 aka 737-800

- filterDescription=L2J - filter aircraft by type description

- filterIcao=^a - filter icao that start with a

- filterSources=adsb,uat,adsr,mlat,tisb,modeS - filter palnes by source type.

- filterDbFlag=military,pia,ladd - filter planes by the db flags.

- sortBy=column - (possible values: icao, flag, flight, registration, aircraft_type, squawk, altitude, speed, vert_rate, distance, track, msgs, seen, rssi, lat, lon, data_source, military, ws, wd

- sortByReverse - reverse the sorting specified using sortBy



See the main readme for more examples on how to use the filters



## Troubleshooting



- reset - reset page settings

- showerrors - show errors on screen



## Rendering parameters



- zoom=1-20 - set zoom level.

- enableLabels - enable labels on aircraft ("L" button).

- extendedLabels=value - select the labels type ("O" button) / Valid values are 0,1,2.

- trackLabels - enable track labels ("K" button).

- labelsGeom - use geometric altitude in track labels

- geomEGM - show geometric altitudes in EGM96 (MSL) instead of WGS84 (simpler geoid reference)

- noVanish - persistence mode ("P" button).

- scale=0.1-x - overall interface scaling.

- iconScale=0.1-x - scale the aircraft icons. (multiplies with ?scale)

- labelScale=0.1-x - scale the aircraft labels. (multiplies with ?scale)

- tempTrails=value - shows temporary trails for ## seconds of history.

- mapDim=0.1-1.0 - reduce map brightness (negative values increase brightness)

- mapContrast=0.1-1.0 - increase the map contrast (negative values decrease brightness)

- filterMaxRange=value - maximum distance of rendered tracks.

- baseMap=maptype - change the map type (as defined in config.js).

- mapOrientation=0-360 - normally true north faces up, use this to change which true direction is pointing up.

- monochromeMarkers=xxxxxx - set constant html color for markers (parameter is an hexadecimal color).

- monochromeTracks=xxxxxx - set constant html color for tracks (parameter is an hexadecimal color).

- outlineWidth=value - set width for the for aircraft icons (only works with webGL disabled)

- outlineColor=xxxxxx - set outline color (parameter is an hexadecimal color, only works with webGL disabled)

- sidebarWidth=xxx - size of sidebar in pixels.

- hideSideBar - hides sidebar.

- hideButtons - hides all buttons.

- autoselect - keeps the plane closest to the center of the screen selected, for use with centerReceiver or lockDotCentered

- centerReceiver - center the view on receiver position.

- lockDotCentered - center the view on receiver position and keep it positioned there even when GPS might update it.

- nowebgl - force rendering without WebGL.

- tableInView - button V / only show aircraft in view in the table

- screenshot - For automatic screenshotting, disables updates after the first load of all aircraft in view

- rangeRings=0,1 - 0 or 1 to enable or disable

- altitudeChart=0,1 - 0 or 1 to enable or disable

- SiteLat=45.0 SiteLon=10.0 - Override the receiver location for this visit



## Toggles



- mil - Military/Interesting.

- tempTrails - enable temporary aircraft trails / tracks.

- mobile - Force mobile view.

- desktop - force desktop view.

- kiosk - force kiosk mode (tempTrails=true / hideButtons=true / userScale=2).

- allTracks - enable tracks as if pressing T



## heatmap / replay (only available with readsb --heatmap parameter)



- replay - replay history of all planes

- heatmap - show a heatmap for the last 24h by default (optional: supply the maximum number of dots drawn, default 32000)

- heatDuration - how many hours to show in the heatmap

- heatEnd - how many hours to shift the heatmap time window into the past

- heatAlpha - 0.1 to 1.0 - how transparent the dots will be

- heatRadius - dot size for heatmap

- heatManualRedraw - only redraw dots when pressing r

- heatFilters - significant slowdown / experimental: enable filtering by type code / type description / hex / DB flags / military / registration / country of registration / data source



- realHeat - real heatmap instead of dots

- heatBlur - parameter for realHeat

- heatWeight - parameter for realHeat



## showTrace (only available with readsb globe-history)



- icao=71be20 - select a plane (multiple planes with comma works but is a bit glitchy)

- showTrace=2024-07-04 - show the trace for a particular UTC date (can be selected via the history tab in the aircraft details)

- startTime=08:31:30 - only show data after this UTC time

- endTime=08:38:30 - only show data before this UTC time

- timestamp=1720081992 - show aircraft details for a particular time as an UNIC epoch timestamp (needs to be within the showTrace date) (clicking on the trace will change this in the URL bar)