https://github.com/williamfridh/kth_is1200_computer_hardware_engineering_project

Pong game built to run on a PIC32 board coded from scrath.
https://github.com/williamfridh/kth_is1200_computer_hardware_engineering_project

assembly c pic32

Last synced: 14 days ago
JSON representation

Pong game built to run on a PIC32 board coded from scrath.

• Host: GitHub
• URL: https://github.com/williamfridh/kth_is1200_computer_hardware_engineering_project
• Owner: williamfridh
• Created: 2023-02-21T15:04:25.000Z (almost 2 years ago)
• Default Branch: main
• Last Pushed: 2024-05-07T20:09:45.000Z (8 months ago)
• Last Synced: 2024-11-01T19:42:35.404Z (2 months ago)
• Topics: assembly, c, pic32
• Language: C
• Homepage:
• Size: 111 KB
• Stars: 1
• Watchers: 1
• Forks: 0
• Open Issues: 4
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# KTH_IS1200_Computer_Hardware_Engineering_Project

## X-Pong (passed as an advanced project)

![C](https://img.shields.io/badge/C-00599C?style=for-the-badge&logo=c&logoColor=white)

**X-Pong is an interpretation of the classic game Pong written in the languages C and Assembly to be run on a pic32 board together with a basic I/O shield. The project was one of the final parts of the KTH course [IS1200 VT23 Computer Hardware Engineering](https://www.kth.se/student/kurser/kurs/IS1200).**

### Configuration

The program comes preconfigured for the hardware given for the course. Only the Makefile should be reconfigured for compiling, anything else can cause errors.

### Compiling & Installation

*Note that these steps are just general instructions. They may vary depending on your system.*

To compile the code, you need the following:

* The files (download via the button above)

* MCB32 toolchain (available on the course page)

* A pic32 board connected to the computer via USB

Now, you simply have to enter the MCB32 environment, navigate to the folder and execute the following commands:

The first command is for compiling the code. Here, you'll see if you got any errors:

```

make;

```

The second command will install the compiled files on the chip kit:

```

make install;

```

Now, unless you got any errors, the code should be sent to the pic32.

### Required Files

All files except for the following are required for compiling:

* .gitignore

* README.md

* readme.txt

### A list of known bugs

* The ball can get stuck on the edge and start vibrating while still moving horizontally.

* The ball can get in a fixed angle at the top and bottom (it keeps going back and fort horizontally).

* Random highscore (slot 9) after first insertion. Dissapear when more is added.

* Pressing OK when starting the game results in moving right paddle.

### Credits & Acknowledgments

* Fridh, William (https://github.com/williamfridh)

* Åhlin, Pontus (https://github.com/PontusAhlin)