https://github.com/yaleman/goodwe2pvoutput

Take the data from your Goodwe inverter and upload it to PVOutput.org
https://github.com/yaleman/goodwe2pvoutput

api-client goodwe pvoutput python python3 solar

Last synced: 2 months ago
JSON representation

Take the data from your Goodwe inverter and upload it to PVOutput.org

• Host: GitHub
• URL: https://github.com/yaleman/goodwe2pvoutput
• Owner: yaleman
• License: mit
• Created: 2019-10-09T12:14:48.000Z (about 5 years ago)
• Default Branch: main
• Last Pushed: 2024-04-26T16:44:10.000Z (8 months ago)
• Last Synced: 2024-05-01T20:01:51.479Z (8 months ago)
• Topics: api-client, goodwe, pvoutput, python, python3, solar
• Language: Python
• Size: 525 KB
• Stars: 2
• Watchers: 4
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • Contributing: .github/CONTRIBUTING.md
  • Funding: .github/FUNDING.yml
  • License: LICENSE
  • Codeowners: CODEOWNERS
  • Security: SECURITY.MD

Awesome Lists containing this project

README

        
Quick service for uploading data from your Goodwe inverter to PVOutput.org. 

It grabs generation (W), load (W), inverter temperature and voltage (V). If you're a subscriber to PVOutput you can store state of charge of your battery too. The data is pulled via my pygoodwe library in the [getDataPvOutput function](https://github.com/yaleman/pygoodwe/blob/master/pygoodwe/__init__.py#L236).

[![Build Status](https://droneio.yaleman.org/api/badges/yaleman/goodwe2pvoutput/status.svg)](https://droneio.yaleman.org/yaleman/goodwe2pvoutput)

# Configuration

File in one of these places:

* ~/.goodwe2pvoutput.conf (Home dir)

* ./goodwe2pvoutput.conf (Current dir)

* /etc/goodwe2pvoutput.conf

Template: see `goodwe2pvoutput.conf.example`

## Goodwe config

Determine the Station ID from the GOODWE site as follows. Open the [Sems Portal](https://www.semsportal.com). The Plant Status will reveal the Station ID in the URL. Example:

    https://www.semsportal.com/powerstation/powerstatussnmin/11112222-aaaa-bbbb-cccc-ddddeeeeeffff

Then the Station ID is `11112222-aaaa-bbbb-cccc-ddddeeeeeffff`.

## PVOutput config

Get your API key and system ID from [the account page on PVOutput](https://pvoutput.org/account.jsp)

# Running it

`goodwe2pvoutput` should do it for testing.

If you want to make it a `systemd` service:

* Download [goodwe2pvoutput.service](https://raw.githubusercontent.com/yaleman/goodwe2pvoutput/master/goodwe2pvoutput.service) to `/etc/systemd/system/` 

* Make sure the config file is at `/etc/goodwe2pvoutput.conf` 

* Run `sudo systemctl daemon-reload` to load the file

* `sudo systemctl status goodwe2pvoutput` to check it looks sane

* `sudo systemctl enable goodwe2pvoutput` to enable it on boot

* `sudo systemctl start goodwe2pvoutput` to start it

# Dependencies

* [pygoodwe](https://pypi.org/project/pygoodwe/)

* [pvoutput](https://pypi.org/project/pvoutput)

* [schedule](https://pypi.org/project/schedule/)

# Contributing

You're probably better off contributing to other packages like the dependencies above, but if you feel the need - [lodge an issue or PR on Github](https://github.com/yaleman/goodwe2pvoutput/issues)

# Changelog

* 0.0.1 Initial Version

* 0.0.2 2019-10-12 Updated to include SoC upload

* 0.0.3 2019-10-12 Turns out the "defaults" aren't as default as I thought in ConfigParser. Fixed.

* 0.0.4 2019-10-12 Way more config error checking

* 0.0.5 2021-01-08 Fixed the example config "systemid" field was mistyped.

* 0.0.6 2021-07-15 Didn't change the module much, added lambda function.