Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/zuna107/nodejs-linux_server_documentation
linux server documentation
https://github.com/zuna107/nodejs-linux_server_documentation
armbian casaos linux nodejs
Last synced: 25 days ago
JSON representation
linux server documentation
- Host: GitHub
- URL: https://github.com/zuna107/nodejs-linux_server_documentation
- Owner: zuna107
- Created: 2024-06-13T13:17:50.000Z (7 months ago)
- Default Branch: main
- Last Pushed: 2024-09-26T13:11:34.000Z (4 months ago)
- Last Synced: 2024-12-30T20:27:54.643Z (25 days ago)
- Topics: armbian, casaos, linux, nodejs
- Homepage:
- Size: 3.06 MB
- Stars: 1
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Linux Server Documentation - Linux Armbian [B860H](https://github.com/topics/b860h)-[HG680P](https://github.com/topics/hg680p)
This documentation is used for Linux Server: `Armbian` - `Amlogic` - `Casa Os`
which I use for `Node.js` servers.
This Armbian type is used for a Set Top Box (STB) that has an [Amlogic](https://github.com/topics/amlogic) type cipset.
## [Install Armbian](https://www.mediafire.com/file/ic0kgvrr30tqlrh/Armbian_20.10.img.xz/file)
- Prepare an SD Card with at least 8GB storage and a Card reader.
- Burn the Armbian.img file with `balenaEtcher` or `Rufus` software and navigate to the SD Card.
- Open the "boot SD card" and enter the `extlinux` folder and open the file named `extlinux.conf` with notepad. then remove the **#** in `rk-3399` and add **#** in `aml s9xxx`.
- Next in the "boot" folder change `u-boot-s905-s912` to `u-boot.ext`.
- then put the `u-boot-hg680p` file into boot and rename it to **uboot.bin**, you can get the **uboot** file in this Repository.
**Important Notes:**
1. The main requirement is that the Set Top Box (STB) is already **unlocked (Root)** and **[Open Wrt](https://github.com/topics/openwrt)** is installed on the system.
2. For STB `b860h` must use **hg680p** bootloader.
- Remove the SD card and insert it into the STB, then plug your network LAN port into the STB, wait for a while and look for the connected device on the router.
- Search for the STB device's `IP Address` on the router's configuration page or you can search for it using the `Advanced IP Scanner` software, usually the device will be named **Arm-64**.
## Set up Linux
- Type the IP Address in the `Putty` software.
Default Username: root
Password : 1234
(You will set a new username and password and etc.)
- Update the Linux repository:
```
sudo apt update
```
## Install Casa Os
```
curl -fsSL https://get.casaos.io | sudo bash
```
CasaOS fully supports ZimaBoard, Intel NUC, and Raspberry Pi. Also, more computers and development boards and fully compatible with Ubuntu, Debian, Raspberry Pi OS, and CentOS with one-liner installation.
#### Hardware Compatibility
- amd64 / x86-64
- arm64
- armv7
#### System Compatibility
Official Support
- Debian 12 (✅ Tested, Recommended)
- Ubuntu Server 20.04 (✅ Tested)
- Raspberry Pi OS (✅ Tested)
## Node JS Server Setup
- Upload the application (bot/app, etc) into the `DATA/name_folder` by excluding the `node_modules` folder when uploading your project.
- Open Casa Os terminal > change directory to your application folder (cd.. > cd DATA > cd folder_application).
- Install `node_modules` with the command:
```
npm install
```
#### [PM2 Setup](https://pm2.keymetrics.io/)
- Open Casa Os terminal and install Pm2:
```
npm install pm2 -g
```
- Create a file named `ecosystem.config.js` in your application directory folder, and fill it in:
```js
module.exports = {
apps: [
{
name: 'your_application_name',
script: './src/index.js', //customize index.js location
instances: 1,
autorestart: true,
watch: true,
watch_delay: 1000,
max_memory_restart: '1G', //restart when memory usage reaches 1GB
env: {
NODE_ENV: 'development',
},
env_production: {
NODE_ENV: 'production',
},
},
],
};
```
- Run the application with the command:
```
pm2 start ecosystem.config.js
```