Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/JurajSadel/wrover-experimental
https://github.com/JurajSadel/wrover-experimental
Last synced: 25 days ago
JSON representation
- Host: GitHub
- URL: https://github.com/JurajSadel/wrover-experimental
- Owner: JurajSadel
- Created: 2022-02-14T10:00:46.000Z (over 2 years ago)
- Default Branch: main
- Last Pushed: 2022-10-13T11:12:47.000Z (over 1 year ago)
- Last Synced: 2024-02-24T22:37:26.917Z (4 months ago)
- Language: Rust
- Size: 9.83 MB
- Stars: 5
- Watchers: 1
- Forks: 1
- Open Issues: 4
-
Metadata Files:
- Readme: README.md
Lists
- awesome-esp-rust - wrover-experimental - Display line directions and departure times of public transport vehicles in Brno, CZ. (Projects / `std`)
README
# Experimental demo using ESP32-wrover kit and Rust
The main goal of the demo is to display line directions and departure times of public transport vehicles in Brno.
### What the project does:
- Establish WiFi connection
- Configure ILI9341 display, HTTP Client and SNTP Client
- parse data from website (web scraping)
- init RTC and display current time with parsed data
# Hardware setup
### HW: Wrover-kit
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-wrover-kit.html
### Used pins
| ILI9341 | Wrover-kit |
----------|---------------------|
| RST | GPIO18 |
| CLK | GPIO19 |
| D_C | GPIO21 |
| CS | GPIO22 |
| MOSI | GPIO23 |
| MISO | GPIO25 |
### HW: ESP32 with ILI9341 display
## Wokwi
### Used pins
| ILI9341 | ESP32-DevKitS-V1.1 | Cable color |
----------|---------------------|-------------|
| GND | GND | black |
| 3.3V | 3.3V | red |
| RST | GPIO4 | green |
| CLK | GPIO18 | orange |
| D_C | GPIO2 | purple |
| CS | GPIO15 | blue |
| MOSI | GPIO23 | yellow |
| MISO | GPIO25 | cyan |
### diagram.json
```json
{
"version": 1,
"author": "Juraj Sadel",
"editor": "wokwi",
"parts": [
{
"type": "wokwi-esp32-devkit-v1",
"id": "esp",
"top": 0,
"left": 0.67,
"attrs": { "builder": "esp32-rust" }
},
{ "type": "wokwi-ili9341", "id": "lcd1", "top": -354.05, "left": 182.84, "attrs": {} }
],
"connections": [
[ "esp:TX0", "$serialMonitor:RX", "", [] ],
[ "esp:RX0", "$serialMonitor:TX", "", [] ],
[ "esp:D4", "lcd1:RST", "green", [ "h0" ] ],
[ "esp:3V3", "lcd1:VCC", "red", [ "v-1.02", "h132.77" ] ],
[ "esp:GND.1", "lcd1:GND", "black", [ "h141.9", "v-1.79" ] ],
[ "esp:D15", "lcd1:CS", "blue", [ "h0" ] ],
[ "esp:D2", "lcd1:D/C", "purple", [ "h0" ] ],
[ "esp:D18", "lcd1:SCK", "orange", [ "h0" ] ],
[ "esp:D25", "lcd1:MISO", "cyan", [ "h-26.13", "v-106.89", "h328.67" ] ],
[ "lcd1:MOSI", "esp:D23", "yellow", [ "v0" ] ],
[ "lcd1:LED", "esp:3V3", "pink", [ "v226.59", "h-190.8" ] ]
],
"serialMonitor": { "display": "terminal" }
}
```
### Wokwi project link
https://wokwi.com/projects/332616143815574099
# Devcontainers
The repository supports:
- [Gitpod](https://gitpod.io/): [](https://gitpod.io/github.com/JurajSadel/wrover-experimental)
- [Vs Code Devcontainers](https://code.visualstudio.com/docs/remote/containers#_quick-start-open-an-existing-folder-in-a-container)
- [GitHub Codespaces](https://docs.github.com/en/codespaces/developing-in-codespaces/creating-a-codespace)
## Build
- Terminal approach:
```
./build.sh [debug | release]
```
> If no argument is passed, `release` will be used as default
- UI approach:
The default build task is already set to build the project, and it can be used
in VsCode and Gitpod:
- From the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette) (`Ctrl-Shift-P` or `Cmd-Shift-P`) run the `Tasks: Run Build Task` command.
- `Terminal`-> `Run Build Task` in the menu.
- With `Ctrl-Shift-B` or `Cmd-Shift-B`.
- From the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette) (`Ctrl-Shift-P` or `Cmd-Shift-P`) run the `Tasks: Run Task` command and
select `Build`.
- From UI: Press `Build` on the left side of the Status Bar.
## Flash
> **Note**
> When using GitHub Codespaces, we need to make the ports
> public, [see instructions](https://docs.github.com/en/codespaces/developing-in-codespaces/forwarding-ports-in-your-codespace#sharing-a-port).
- Terminal approach:
- Using custom `runner` in `.cargo/config.toml`:
```
cargo +esp run [--release]
```
- Using `flash.sh` script:
```
./flash.sh [debug | release]
```
> If no argument is passed, `release` will be used as default
- UI approach:
- From the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette) (`Ctrl-Shift-P` or `Cmd-Shift-P`) run the `Tasks: Run Task` command and
select `Build & Flash`.
- From UI: Press `Build & Flash` on the left side of the Status Bar.
## Wokwi Simulation
- Terminal approach:
```
./run-wokwi.sh [debug | release]
```
> If no argument is passed, `release` will be used as default
- UI approach:
The default test task is already set to build the project, and it can be used
in VsCode and Gitpod:
- From the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette) (`Ctrl-Shift-P` or `Cmd-Shift-P`) run the `Tasks: Run Test Task` command
- With `Ctrl-Shift-,` or `Cmd-Shift-,`
> Note: This Shortcut is not available in Gitpod by default.
- From the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette) (`Ctrl-Shift-P` or `Cmd-Shift-P`) run the `Tasks: Run Task` command and
select `Build & Run Wokwi`.
- From UI: Press `Build & Run Wokwi` on the left side of the Status Bar.
### Debuging with Wokwi
Wokwi offers debugging with GDB.
- Terminal approach:
```
$HOME/.espressif/tools/xtensa-esp32-elf/esp-2021r2-patch3-8.4.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gdb target/xtensa-esp32-espidf/release/brno-public-transport -ex "target remote localhost:9333"
```
> [Wokwi Blog: List of common GDB commands for debugging.](https://blog.wokwi.com/gdb-avr-arduino-cheatsheet/?utm_source=urish&utm_medium=blog)
- UI approach:
Debug using with VsCode or Gitpod is also possible:
1. Run the Wokwi Simulation in `debug` profile
> Note that the simulation will pause if the browser tab is on the background
2. Go to `Run and Debug` section of the IDE (`Ctrl-Shift-D or Cmd-Shift-D`)
3. Start Debugging (`F5`)
4. Choose the proper user:
- `esp` when using VsCode or GitHub Codespaces
- `gitpod` when using Gitpod