Projects in Awesome Lists by mattvenn
A curated list of projects in awesome lists by mattvenn .
https://github.com/mattvenn/basic-ecp5-pcb
Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
Last synced: 02 Apr 2025
https://github.com/mattvenn/teensy-audio-fx
Playable effects modeled on the Teenage Engineering Pocket operator series. Featuring Teensy 4 for audio processing.
Last synced: 21 Mar 2025
https://github.com/mattvenn/first-fpga-pcb
FPGA dev board based on Lattice iCE40 8k
Last synced: 02 Apr 2025
https://github.com/mattvenn/vga-clock
Show the time on a VGA monitor. Submitted for the Google MPW1 ASIC shuttle.
Last synced: 02 Apr 2025
https://github.com/mattvenn/vga_clock_pcb
Open source hardware down to the chip level!
Last synced: 02 Apr 2025
https://github.com/mattvenn/flipflop_demo
Flip flop setup, hold & metastability explorer tool
flip-flop metastability ngspice simulation sky130
Last synced: 21 Mar 2025
https://github.com/mattvenn/magic-inverter
an inverter drawn in magic with makefile to simulate
Last synced: 02 Apr 2025
https://github.com/mattvenn/minim-reader
reading a british gas branded minim energy meter with a webcam and python
Last synced: 21 Mar 2025
https://github.com/mattvenn/multi_project_tools
tools to help make the most of the limited space we have on the Google sponsored Efabless shuttles
Last synced: 21 Mar 2025
https://github.com/mattvenn/understanding-tinyfpga-bootloader
understanding the tinyfpga bootloader
Last synced: 02 Apr 2025
https://github.com/mattvenn/crap-o-scope
crap-o-scope scope implementation for icestick
Last synced: 02 Apr 2025
https://github.com/mattvenn/logluts
Tool to parse yosys and nextpnr logfiles to then plot LUT, flip-flop and maximum frequency stats as your project progresses.
Last synced: 21 Mar 2025
https://github.com/mattvenn/wishbone_buttons_leds
simple wishbone client to read buttons and write leds
Last synced: 02 Apr 2025
https://github.com/mattvenn/efabless_project_tool
Tool to fetch and parse data about Efabless MPW projects
Last synced: 21 Mar 2025
https://github.com/mattvenn/simple-brushless
a cheap and simple educational brushless motor
Last synced: 02 Apr 2025
https://github.com/mattvenn/simulate-gate
Project 1.1 Simulate a Skywater 130nm standard cell using ngspice
Last synced: 02 Apr 2025
https://github.com/mattvenn/xor_vga_fpga
playing with XOR video patterns on an FPGA
Last synced: 02 Apr 2025
https://github.com/mattvenn/instrumented_adder
Instrumenting adders to measure speed
adder asic hardware ngspice simulation sky130
Last synced: 02 Apr 2025
https://github.com/mattvenn/frequency_counter
Project 2.2 Frequency counter
Last synced: 02 Apr 2025
https://github.com/mattvenn/spi_client
SPI client core in verilog, tested with raspberry pi SPI master
Last synced: 02 Apr 2025
https://github.com/mattvenn/pyfda-cocotb-demo
Audio filtering with pyfda and cocotb
Last synced: 02 Apr 2025
https://github.com/mattvenn/wrapped_rgb_mixer
Demo project for the Zero to ASIC Course.
Last synced: 02 Apr 2025
https://github.com/mattvenn/intro-formal-videos-resources
resources for the Introduction to Formal Verification series of videos
Last synced: 02 Apr 2025
https://github.com/mattvenn/formal-intro-course
materials for Formal Verification introduction course
Last synced: 02 Apr 2025
https://github.com/mattvenn/litho-light
An illuminated desk stand for a 150mm photolithography mask
Last synced: 02 Apr 2025
https://github.com/mattvenn/seven_segment_seconds
Demo project for Zero to ASIC course & presentations
Last synced: 02 Apr 2025
https://github.com/mattvenn/ds2604-sram-driver
verilog and testbench for ds2604 8k x 8bit SRAM driver
Last synced: 02 Apr 2025
https://github.com/mattvenn/mazepuzzlebox
mazepuzzlebox DXF generation and website
Last synced: 21 Mar 2025
https://github.com/mattvenn/measure-video-latency
extremely rough and ready video latency measurement tool
Last synced: 02 Apr 2025
https://github.com/mattvenn/atmel-32u4-jtag-notes
My debugging notes with using avarice, avr-gdb, atmel mega 32u4 and dragon jtag
Last synced: 02 Apr 2025
https://github.com/mattvenn/formal_timer
Project 3.1 Formal timer
formal-verification sby yosyshq
Last synced: 02 Apr 2025
https://github.com/mattvenn/laser-estimator
Attempt to estimate laser cutting time from an SVG file
Last synced: 07 Apr 2025